| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|---|
| Certification: | CE SGS ISO FDA |
| Type: | Feed Pellet Machine |
| Brand Name: | HIRIN |
| Condition: | New |
Quick Details
Specifications
Tipping Type Counterflow Cooler for Pellet Feed Cooling
Suitabler used for cooling granular feed, especially the extruded pellets
Compact structure, small space required.
Octagonal cooling bin, eliminating death corner.
Hydraulic flexible driven tipping plates for smooth and controllable discharging rate.
Little maintenance required and low energy cost.
FAQ
Pellet mill--Load on pellet mill fluctuates unreasonably or the pellets quality is nonuniform.
(1) Steam supply is not enough or the pressure is changed.Check the steam pipelines. (2) Unstable feeding; Adjust the feeding speed. (3)Deflecting scraper is worn out resulting in uneven feeding; Replace the deflecting scraper.
Grinder--the bearing is too heat
(1)the centers of the main shaft and motor are not concentric; Adjust it to be concentric with the main shaft. (2)the lubricating grease is too much, too little or bad. Replace the lubricating grease and refuel it in accordance with the regulations. (3)the bearing is damage; Replace the new bearing. (4)the main shaft is bent and the motor is unbalance; Align the main shaft and balance the rotor. (5)Work overload for long term; Reduce the feeding amount.(6)the model of the selected lubricating grease is wrong; Choose the Lithium base molybdenum disulfide;
Extruder--Suddenly do not discharge the material after normal work.
(1)Too much feedstock in short time.Slow down the feeding speed. (2)Foreign matters block the discharge hole. Stop the machine and dismount to clean.
Main Features:
- this cooler can be suitable for various material of cooling, flake, granular and clastic expanded feed of cooling;
- the cooler uses pneumatic flap. Material layer distributes uniformity, good cooling effect, discharging smooth, accuracy and low failure rate;
- Discharging speed can be adjusted. Discharging is uniformity and smooth;
- the cooler has unique rotating and institution, ensure the material to uniform and thorough cooling, and can reduce granular material of broken;
- after-cooling temperature of material will be no higher than 5℃ above room temperature, moisture reduction rate no less than 3.8%, resulting in high quality pellet food production, extending shelf life of pellet feed and giving better cost effectiveness.
Parameter Table:Model
SWLN14x14
SWLN16x16
SWLN19x19
SWLN24x24
SWLN28x28
Capacity(t/h)
5
8
10
20
30
Power of hydraulic system (kW)
2.2
2.2
3
3
3
Cooling time (min)
10~15
Steam preheat after cooling ℃
Room temperature(3~5)
Total power (kW)
2.2
2.2
3
(30.55)3.55
(30.55)3.55
Air suction quantity (m3/h)
8000
9000
18000 ≥200mmH2O
36000
54000
about us
ZHANJIANG HENGRUN MACHINERY CO.,LTD is an integrated high-tech enterprise which includes the R&D, Production, sales of complete set of feed machinery. It is certified by the ISO9001:2008 and EU CE, and also awarded high-tech enterprise in 2010. In October of 2016, research center of Guangdong feed machinery technology settled In our company. Our product mix includes: water-drop hammer mill, vertical Pulverizer, double-shaft paddle mixer, HR 420-660 pellet mill, HR series Extruder( most cost-effective in domestic market),Horizontal circulation dryer( lowest energy Consumption),Forage Processing equipment, etc, covering more than 20 series, over 60 models. We take a leading position in the field of feed machinery.
HR SERIES TWIN-SCREW EXTRUDER is widely used for Processing a variety of floating and sinking aquatic feed, pet food and piglet Feed and food processing. Different specifications are available for different Processing requirement. the usage of density controller increased the capacity of sinking feed by 1.5~2 times. the gear box is our patent product which Greatly prolongs its service life. Hengrun twin-screw extruder takes up the 80% Domestic market and expands very quickly in overseas market during the recent Yearswith its ingenious design and exquisite manufacturing advantages, the company won the ISO9001:2008 international quality system certification of Swiss international company SGS, a well-known international certification company, in 2009.
and in 2010, it passed the national high-tech enterprise audit
Environmental management system certification
in October, 2016, the research and development center of Guangdong feed machinery engineering technology settled in our company
Hengrun Company is industry leader in product research and development. Hammer mill, extruder, dryer, pellet mill, oil sprayer what was identified as high-tech products.Total more than 70 practical new-type patents, 6 inventive patents
Hengrun-designs andManufactures all key Processing machines and Offers complete aqua feed & poultry and livestock feed production plants for the global feed industry.
We offer aFull range of processing Machines and equipment from Raw material intake to Finished feed bagging as a single unit or complete plant Solution.
Turn key project for aquaculture feed processing plant is our core business for customers at home and abroad. below are some of our home and abroad aquaculture and poultry feed turn key projects.
