Bus Drop Cable Support Grips, Bus Drop Support Grips

Also known as bus drop grips, these grips support cable weight and relieve tension. They also damp vibration in hanging runs of cable, rod, and tubing. You can support these grips with a hook.

Safety spring (sold separately) alleviates strain from sudden pulls, but it reduces the work load limit of the grip.
Bus Drop Support Grips

1. Bus drop grips are woven of galvanized steel wire/304 stainless steel wire
2. Relieve any direct tension from the critical connection and absorb vibration and flexing
3. Offered with either the single eye or locking bale attachment
4. Bus drop grips are used as cable support from bus duct
5. Optional bus drop safety spring can be used with single eye type of disassembling draw bar from coll, placing through eye loop and replacing draw bar
6. Single eye for use when cable is vertical and for applications where cable bends
7. Locking bale attachment fits around beam or pipe and can be locked in place

Part Number	Cable Diameter	Bale Length	Mesh Length	Approx Break Strength
HGBD01	0.22-0.32"(5.6-8.1mm)	12"(304.8mm)	3.5"(88.9mm)	1100 lbs.
HGBD02	0.30-0.43"(7.6-10.9mm)	12"(304.8mm)	4.5"(114.3mm)	1100 lbs.
HGBD03	0.41-0.56"(10.4-14.2mm)	12"(304.8mm)	5.0"(127.0mm)	1100 lbs.
HGBD04	0.53-0.73"(13.5-18.5mm)	15"(381.0mm)	6.5"(165.1mm)	1100 lbs.
HGBD05	0.70-0.85"(17.8-21.6mm)	16"(406.4mm)	8.5"(215.9mm)	1900 lbs.
HGBD06	0.82-1.00"(20.8-25.4mm)	16"(406.4mm)	8.5"(215.9mm)	1900 lbs.
HGBD07	0.96-1.25"(24.4-31.8mm)	17"(431.8mm)	11.0"(279.4mm)	1900 lbs.