Technical Parameters

 

*Power supply: AC 110V, 60 Hz

 

                            AC 120V, 60 Hz 

 

                            AC 220V, 50 Hz

 

                            AC 230V, 50 Hz

 

                            AC 240V, 50 Hz

 

*Two Speed: low-speed: 120rpm, high-speed: 250rpm.

 

*Regular alarm: after mixing 20S it will have beep sound and alarm light will flash to  

 

 warn user using  the alginate immediately, or it will dry.

 

*Stop working if overload: When the motor overloaded, the unit will stop working

 

 automatically after 3S, press Start key to working again.

 

*Gross weight: 2.0 KG

 

*Size: 280*230*230 mm

 

Usage:

 

1. Put the cleaning and disinfected mixing bowl into the tray, turn clockwise to lock it.

 

2. Let power plug connect to the electric socket with grounding, turn on the power 

 

    switch(6).

 

3. Put the water and impression material into the mixing bowl according to the 

 

    proportion from the manual of impression material. Then mix them to bulk state.

 

4. Put the spatula into mixture, press Start/Set button10)to start at low speed (the liquid and powder will not easy to spill out when in low speed), close the spatula along the mixing bowl and move it according to the rotate direction.

 

5. Press Start/Set button 10)again, it will rotate in high-speed. the spatula should along the wall of mixing bowl, it's better for mixing, after 20S the alarm light will flash to notice user to use the mixture as soon as possible.

 

6. Press " Stop" button to stop working. Use spatula along mixing bowl to remove the mixture, just complete.

 

7. Anticlockwise rotate the mixing bowl, then take it out, and clean it.

Comprehensive Peformance Comparision