| Warranty: | 3 years |
|---|---|
| Brand Name: | DFJX |
| Method: | Hydraulic Pressure |
| Processing: | Brick Cutting Machine |
| Condition: | New |
| Place of Origin: | China (Mainland) |
| Automatic: | Yes |
| Brick Raw Material: | Crushed Stone |
| Type: | Hollow Block Making Machine |
Quick Details
Specifications
Be Careful& Be Meticulous,High Efficiency&Low Consumption,Pursing
Perfection&Satisfying Customers.
Marketing System of New Oriental Machinery
Testing on Raw materials
Raw materials for making bricks are including clay,shale,coal gangue,fly ash,tailings, construction waste,river mud,life sludge and so on.Chemical composition analysis,physical property and moisture percent of green bricks are essential actors for whether this kind of raw materials is suitable for making bricks or not. and all these will affect the following steps of process planning,equipment matching,kiln structure,bricks quality and so on.
Overall Planning
A brick factory should be overall planned for storage of raw materials,manufacturing shops,finished product stacking,power control system,office and living facilities,greenbelt and lighting,etc.Based on local situation.
Management Rules
to operate machines according to specification and handbooks,No Overburden!
Put more efforts on training and daliy maintenance for machines.
Regulate enterprise rules and employees' behavior to ensure smooth production.
Formulate company strategy planning and mission.
Structure if kiln
Settle down the kiln structure and relevant equipment according to the process design. Pay attention to raw materials quality for heating engineering and make sure hign quality and output of the kiln.
Choice of equipments
We shall have to choose equipment according to the process design,mainly concerning on the stablization(No problem happens in a certain period,which depends on the texture,strength,structure and fineness for the equipment), progressiveness,service and cost performance.
Process Design
Process design is an overall design for raw materials processing(crushing,ageing),molding,storage of green bricks,drying,sintering,unloading,packing and so on.
Product Description
the new generation of SQTP type servo strip cutting and blanking system adopts the international brand PLC programmable controller + servo drive device to display data on the touch screen to realize the man-machine exchange operation interface. It has the characteristics of convenient operation, flexible parameter adjustment, and quickness.
the combination of servo drive and planetary reducer has the advantages of fast speed, stable operation, low noise and maintenance-free, etc., and solves the disadvantages of low efficiency and high noise of traditional cutting equipment. this system is suitable for large-scale extruder hard extrusion high output characteristics. At the same time, the double wire rack structure can realize fast wire replacement without stopping, which greatly improves production efficiency.
Perfection&Satisfying Customers.
Marketing System of New Oriental Machinery
Testing on Raw materials
Raw materials for making bricks are including clay,shale,coal gangue,fly ash,tailings, construction waste,river mud,life sludge and so on.Chemical composition analysis,physical property and moisture percent of green bricks are essential actors for whether this kind of raw materials is suitable for making bricks or not. and all these will affect the following steps of process planning,equipment matching,kiln structure,bricks quality and so on.
Overall Planning
A brick factory should be overall planned for storage of raw materials,manufacturing shops,finished product stacking,power control system,office and living facilities,greenbelt and lighting,etc.Based on local situation.
Management Rules
to operate machines according to specification and handbooks,No Overburden!
Put more efforts on training and daliy maintenance for machines.
Regulate enterprise rules and employees' behavior to ensure smooth production.
Formulate company strategy planning and mission.
Structure if kiln
Settle down the kiln structure and relevant equipment according to the process design. Pay attention to raw materials quality for heating engineering and make sure hign quality and output of the kiln.
Choice of equipments
We shall have to choose equipment according to the process design,mainly concerning on the stablization(No problem happens in a certain period,which depends on the texture,strength,structure and fineness for the equipment), progressiveness,service and cost performance.
Process Design
Process design is an overall design for raw materials processing(crushing,ageing),molding,storage of green bricks,drying,sintering,unloading,packing and so on.
Product Description
the new generation of SQTP type servo strip cutting and blanking system adopts the international brand PLC programmable controller + servo drive device to display data on the touch screen to realize the man-machine exchange operation interface. It has the characteristics of convenient operation, flexible parameter adjustment, and quickness.
the combination of servo drive and planetary reducer has the advantages of fast speed, stable operation, low noise and maintenance-free, etc., and solves the disadvantages of low efficiency and high noise of traditional cutting equipment. this system is suitable for large-scale extruder hard extrusion high output characteristics. At the same time, the double wire rack structure can realize fast wire replacement without stopping, which greatly improves production efficiency.
| Type/Technical Parameters | Stripe Speed(strip/min) | Cutting Speed(block/min) |
| SQTP-1 | 35 | ≤32 |
| SQTP-2 | 30 | ≤28 |
| Motor Power(kw) | Appearance Size(LxWxH)/mm | Weight(kg) |
| 22.5 | 8500X2150X1900 | 4000 |
| 23.5 | 8500X2250X1900 | 4500 |