| Warranty: | 3 years |
|---|---|
| Brand Name: | DFJX |
| Method: | Hydraulic Pressure |
| Processing: | Brick Production Line |
| Condition: | New |
| Place of Origin: | China (Mainland) |
| Automatic: | Yes |
| Brick Raw Material: | Clay |
| Type: | Hollow Block Making Machine |
Quick Details
Specifications
Be Careful& Be Meticulous,High Efficiency&Low Consumption,Pursing Perfection&Satisfying Customers.
Marketing System of New Oriental Machinery
Testing on Raw materials
Raw materials for making bricks are including clay,shale,coal gangue,fly ash,tailings, construction waste,river mud,life sludge and so on.Chemical composition analysis,physical property and moisture percent of green bricks are essential actors for whether this kind of raw materials is suitable for making bricks or not. and all these will affect the following steps of process planning,equipment matching,kiln structure,bricks quality and so on.
Overall Planning
A brick factory should be overall planned for storage of raw materials,manufacturing shops,finished product stacking,power control system,office and living facilities,greenbelt and lighting,etc.Based on local situation.
Management Rules
to operate machines according to specification and handbooks,No Overburden!
Put more efforts on training and daliy maintenance for machines.
Regulate enterprise rules and employees' behavior to ensure smooth production.
Formulate company strategy planning and mission.
Structure if kiln
Settle down the kiln structure and relevant equipment according to the process design. Pay attention to raw materials quality for heating engineering and make sure hign quality and output of the kiln.
Choice of equipments
We shall have to choose equipment according to the process design,mainly concerning on the stablization(No problem happens in a certain period,which depends on the texture,strength,structure and fineness for the equipment), progressiveness,service and cost performance.
Process Design
Process design is an overall design for raw materials processing(crushing,ageing),molding,storage of green bricks,drying,sintering,unloading,packing and so on.
Product Description
this machine adopts new high quality steel plate, the channel steel adopts new GB(Hanggan), adopts three steps shift making craftwork, can control the raw material feeding effectively. It is suit for the clay, yellow earth or coal stone which related moisture is 23%, the fine is no more than 250mm. According to the control system, can control the conveyor belt speed; can control the feeding of raw materials, and mix the pug materials and raw material proportionally. this machine has double functions, stirring and crushing, it is the important device for the new type wall materials enterprises.
Marketing System of New Oriental Machinery
Testing on Raw materials
Raw materials for making bricks are including clay,shale,coal gangue,fly ash,tailings, construction waste,river mud,life sludge and so on.Chemical composition analysis,physical property and moisture percent of green bricks are essential actors for whether this kind of raw materials is suitable for making bricks or not. and all these will affect the following steps of process planning,equipment matching,kiln structure,bricks quality and so on.
Overall Planning
A brick factory should be overall planned for storage of raw materials,manufacturing shops,finished product stacking,power control system,office and living facilities,greenbelt and lighting,etc.Based on local situation.
Management Rules
to operate machines according to specification and handbooks,No Overburden!
Put more efforts on training and daliy maintenance for machines.
Regulate enterprise rules and employees' behavior to ensure smooth production.
Formulate company strategy planning and mission.
Structure if kiln
Settle down the kiln structure and relevant equipment according to the process design. Pay attention to raw materials quality for heating engineering and make sure hign quality and output of the kiln.
Choice of equipments
We shall have to choose equipment according to the process design,mainly concerning on the stablization(No problem happens in a certain period,which depends on the texture,strength,structure and fineness for the equipment), progressiveness,service and cost performance.
Process Design
Process design is an overall design for raw materials processing(crushing,ageing),molding,storage of green bricks,drying,sintering,unloading,packing and so on.
Product Description
this machine adopts new high quality steel plate, the channel steel adopts new GB(Hanggan), adopts three steps shift making craftwork, can control the raw material feeding effectively. It is suit for the clay, yellow earth or coal stone which related moisture is 23%, the fine is no more than 250mm. According to the control system, can control the conveyor belt speed; can control the feeding of raw materials, and mix the pug materials and raw material proportionally. this machine has double functions, stirring and crushing, it is the important device for the new type wall materials enterprises.
| Type/Technical Parameters | Processing capacity(m3/h) | Motor Power(kw) | Appearance Size(LxWxH)/mm | Weight(kg) |
| XGD-1000x5000 | 60-100 | 8.5 | 5350X3000X1400 | 4500 |
| XGD-800x5000 | 30-60 | 7.5 | 5350X1800X1250 | 2500 |
| XGD-800x4000 | 30-60 | 7.5 | 3350X1800X1250 | 2300 |