GK-double component screen printing ink

1. Substrates:

Glass, metal.

2. Applicable products:

Weighing apparatus glass, home decoration Glass and metal product.

3. Product features:

Good adhesion, good leveling, ethanol Resistant.

4. Technical parameters:

Fineness:≦8um	Viscosity(25℃): 4500+500mp.S
Leveling Property: good	Ethanol Resistance: good
Adhesion: Good	/

5.Instructions:

(1) Please stir it evenly before use.

(2) Please add GK-01 Thinner or 783 slow Dryer before use if necessary.

(3) Please add GK-Thickener, add 10% for Black color, add 8% for other colors. The ink with thickener must be finished Within 8 hours.

(4) Drying temperature:

Heat drying: 140-150℃,10-15 minutes.

Air drying: More than 24 hours.

(5) Mesh: recommend 200(80T)mesh.

(6) Mesh cleaning: mesh cleaning agent or Cyclohexanone.

6. Notes:

(1) the drying time can be shortened if Increasing the drying temperature;

(2) Please make a sample test before use;

(3) Please tighten the hardener at once after Use. Because the hardener will fail after exposing to the moister in air.

(4) Please stir it evenly after adding Thickener and then put aside for 5 minutes before use

(5) Clean the mesh as soon as finish printing to avoid clogging.

7. Package:

1kg/can

8. Storage:

It can be stored for 12 Months in 0-35℃. Keep in cool and dry place.

9.Remarks:

(1) Please thoroughly Read the instructions and make a sample test before use.

(2) the technical data in this article is for reference only.

the END