99.95% Moly Rod / Molybdenum Round Bar diameter 1 - 100mm for Sapphire Industry

 

Molybdenum ruond bar is resistant to corrosion when the humidity is below 60%. Molybdenum round bar is made of by high quality molybdenum raw material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity.  however, it must be protected at elevated temperatures. Molybdenum can oxidize in the presence of oxidizing gases at temperatures above 250° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.

 

Moly bars have high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability.

 

Molybdenum Round Bar:

 

Purity: Mo 99.95%  

Appearance: Silver gray metal luster

this product is made with Mo-1

the impurity content accords with GB3462-82 standard 

 

Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. at high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc. 

 

Pure Molybdenum Material Properties:

 

Description	Code	Density g/cm3	Dimensions (mm)	Applications
Conventional molybdenum bars	Mo-2	9.3	Square 15 x 15 x 600 Round Dia17 x 350	Pure molybdenum bars for drawing normal molybdenum wire
High temperature molybdenum bars	GHM			Raw material for molybdenum wire in electrical light sources and rods
	RGMo-2	9.9	Dia(16.5-18) x (350-450)
Molybdenum bars for steel smelting	Mo-1 Mo-4	9.5	20 x 20 x 600	with high purity, it is used as additives in steel smelting.