Product description:

Intelligent self-check function divide into monthly test and annual test, 2020 new design Emergency LED driver with external lithium battery pack. Use a smart chip to control the LED emergency driver.

5-20W LED light emergency kit specifications:

1. Lighting fixture power: 5-20W ( MAX 30W )

2. Emergency power: Full 5-20W

3. Battery type: 3 cells rechargeable 3.7V 2600mAh lithium ion batteries make up a battery pack

4. Emergency duration time: 3 hours

5. Battery cycle time: 500 times

6. Working input: AC85-265V

7. Emergency output voltage: DC 230V

8. Charge time: 24 hours

9. Protection degree: IP30

10. Warranty: 3 years

 

LED Emergency Kit features:

Applicable to all kinds of LED lights

Self-check function ( monthly test and annual test ).

Automatically turns on LED light when there is a main power failure.

LED emergency inverter has overload protection, short circuit protection, overcharge and over-discharge protection, wire fault connection protection, over temperature protection.

External indicator light: green=main power, red=charging, red & green=battery fault.

 

Working Environment attention:

LED emergency conversion kit working temperature between -5℃ and 45℃.

If the emergency driver is not used for over 3 months, it should be connected to AC power for full charging and discharging (after charging the battery for 24 hours, then discharge the battery until LED lamp is completely off. Then keep the emergency driver working with AC power for 24 hours and put it in dry ventilated places.