COpy method

1. Code clearing method: press and hold the lock/unlock buttons at the same time until the LED indicator flashes 3 times and then release the unlock button (press the lock button all the time), press the unlock button three times and the indicator light will not stop Flashes, it means the code clearing is successful.

2. Duplicate operation: after clearing the code, put the old remote control and the copy remote control close to each other, press and hold the button to be copied and any button of the remote control at the same time, until the indicator light on the copy remote control flashes It is always on after five times, indicating that the copy is successful.

(If the copy is unsuccessful, please repeat the above method carefully. in order to ensure the success rate of the copy, please keep the old remote control and the copy remote control not too far apart when copying. It is best to keep the two remote controls close to each other when copying. Together.)

3. Code recovery: after clearing the code, before copying the new data, you can recover the last used data through the following operations. When pressing the two buttons on the remote control at the same time, wait for three seconds to see the LED indicator blinking and the data recovery function is complete, which means that all the buttons are restored to store data