Portable Road Shot Blasting Machine for Steel Plate and Road Surface Cleaning

Shot blasting machine applied in highway surface cleaning blasts the pills on the road surface at high speed and certain angle by the method of mechinery, make pills impect the surface of the road and make the road surface roughness, reach the effect of removing residuum,at the same time,dust collector will produce negative pressure to make pills and impurities and dust dust recovery after air cleaning, intact pills will automatically be recycled to used, and impurities and dust will drop into the dust collecting box.

Application of road shot blasting machine:

1.Industrial floor coating and processing

2.Mark line processing

3.the airport line cleaning

4.Steel plate and steel structure surface clean treatment and rust remove

5.Concrete bridge surface treatment

6.Road surface anti-skid treatment, bleeding treatment

7.the airfield runway surface friction coefficient and texture restoration

8.Bridge nursing

9.the highway project conservation

10.the hull surface maintenance rust removing

11.Storage tanks conservation remove rust and paint

12.Epoxy resin floor clean

Our shot blasting machine advantages;

Shot blasting machine is equipped with WEG international famous brand motor imported;

Shot blasting machine is equipped with OMRON international brand Power protection device is imported from Japan.

Notice: it keep the Simpler operation,our concrete shot blaster with OMRON full protection power system in Japan.It can cut off the control system in 0.3 seconds and give a machine fault indication, thus avoiding the loss of the user, If a power failure occurs.

Working principal:

Steel shots in the lower part of the separation box goes into the blasting components through feeding tube and driven by the motor. the high-speed rotating shot will be thrown and stroke against the surface of workpieces at the speed of 80m/s. and thus carry out clean-up operation. under the effect of negative pressure, the shot abrasive and dust will be back into sand separation box where the shot, dust and impurities will be separated completely. Good shot materia into the blast is expected to continue to use. Dust and impurities wating to be processed have been filtered to the airtight dust box.

Concrete floor shot blasting machine asphalt removal machine is through the mechanical method, the pills at a high speed and a certain angle to the work surface, so that the pill impact the surface of the road surface, so that the surface of the road rough and remove the effect of the residue, while dust the negative pressure will be the pill and the cleaning of impurities such as dust recovery after air cleaning, the integrity of the pellets will be automatically recycled, and impurities and dust will fall into the collection box.

Technical parameter:

Model	BRTK-200	BRTK-250/270	BRTK-350/420	BRTK-550	BRTK-600
Cleaning amplitude(mm)	200	250 /270	350/420	550	600
Efficiency(m2/h)	>80	>180	>200	>400	>550
Power(kw)	7.5	11	2*7.5	2*11	2*11
Weight(kg)	154	325	350	560	450