| Type: | Firecracker & Fireworks |
|---|---|
| Brand Name: | ENTHUSIASM |
| Occasion: | Wedding |
| Firework Type: | Fountain |
| Type: | fireworks ignition system |
| Other Names: | fireworks firing system |
| Model Number: | AN12 |
| Place of Origin: | China (Mainland) |
| Channel: | 12 |
| Material: | Plastic |
| Control mode: | Wireless Remote Control |
| Frequency: | 433Mhz |
| Remote distance: | 70-100 meter |
| Receiver Power: | Output: 6V 4pcs AA battery |
Quick Details
Specifications
AN12 Programmable 12 cue remote control balloon fireworks igniter firing system
Usage Introduction:
1. Put 4 pcs of dry battery into the battery box, and turn on the switch, the red and yellow light will be bright and the brightness will the same, if not, it means there is something wrong with the receivers, and then press the button of the remote,the yellow light will be extinguish and the red light will be more bright than before, it means the remote and the receive is normal.
2.Put the product connect with the receiver, if the red light will be extinguish and the yellow light will be more bright than before,it means the product is normal.
3. after you connect the product with the receivers well, press the button of the relative remote to make the product firing
4. Set the control number by the remote (do not connect the product):Find the little hole in the back side of the receiver box,take a small stick into the hole to press it, the red and yellow light will be flickered, press the button of the remote (for example NO.3),take out the stick first, and then relax the remote,then setting the control number succeed, now this receiver is controlled by NO.3,other key cannot control this receiver. When do this, you can use one key to control more receivers.
Usage Introduction:
1. Put 4 pcs of dry battery into the battery box, and turn on the switch, the red and yellow light will be bright and the brightness will the same, if not, it means there is something wrong with the receivers, and then press the button of the remote,the yellow light will be extinguish and the red light will be more bright than before, it means the remote and the receive is normal.
2.Put the product connect with the receiver, if the red light will be extinguish and the yellow light will be more bright than before,it means the product is normal.
3. after you connect the product with the receivers well, press the button of the relative remote to make the product firing
4. Set the control number by the remote (do not connect the product):Find the little hole in the back side of the receiver box,take a small stick into the hole to press it, the red and yellow light will be flickered, press the button of the remote (for example NO.3),take out the stick first, and then relax the remote,then setting the control number succeed, now this receiver is controlled by NO.3,other key cannot control this receiver. When do this, you can use one key to control more receivers.