Steel Frame
- C Type Vertical frame: use 60*40*1.5mm or 50*30*1.5mm high quality metal sectional material welding molding, the surface is coated with epoxy resin powder, making the frame stable, exquisite appearance and good corrosion resistant.
- Top beam/Biottom beam: use 60*40*1.5mm or 50*30*1.5mm high quality cold rolled sheet or galvanized steel sheet stamping molding, fixed on vertical frameset by screws or blind rivets.

Workop: use 12.7mm solid core physiochemical board for laboratory use, all around is thickened to 25.4mm, edgewise double layer circular, acid-base resistance, water proof, anti-static and easy to wash.

Cabinet Body: use 18mm thick high quality melamine board, edge sealed by 2mm thick high quality PVC.
- Door&DRawer Panel: door and drawer panels including all cupboard, use melamine board to make, the thickness of board is 18mm, the around is sealed by high quality PVC to seal.
- Baffle: the material use 18mm thick melamine board, the around is sealed by high quality PVC.
-Slide Rail: use high quality 3- section rolling ball slide plant for laboratory use, no noise and light slide when pulled, high strength and not deformed after long term load (open-close can reach to over 100,000 times).
- Hinge: use high quality steel hinges for laboratory use, opening angles 90°, no noise, no springback, high strength and can not be broken.
- Handle: use integral forming groove handle or C type stainless steel handle, firm and elegant appearance.
-Adjustable Foot: use 10 cm screw underlay rubber protecting seat, intermediate line shock-absorbent plate.