| Brand Name: | Beion |
|---|---|
| Temperature of Media: | Medium Temperature |
| Material: | Stainless Steel |
| Pressure: | Medium Pressure |
| Standard or Nonstandard: | Standard |
| Model Number: | V25T24-62 |
| Place of Origin: | China (Mainland) |
| Port Size: | 25mm |
| Media: | Base |
| Power: | Solenoid |
| Structure: | Diaphragm |
| working voltage: | 24VDC |
Quick Details
Specifications
Description forV Series of Diaphragm Valve:
L Solenoid operated with diaphragm, available for all kinds of corrosive liquid and non-granular liquid, etc.
L Provide product with 2-way or 3-way structure
L Low consumption
L Solenoid coil fully isolated designation
L Wetted materials: PTFE, PEEKTM, PPS, EPDM and perfluorinated rubber, etc.
L Modular installation reaching no leaking point and reducing installation space
L Continuous operating for 200,000,000 times
L Small size,small occupied space
L Response time extremely short
L Small internal fixed volume
L Standard withstand pressure is 0~60psi,higher pressure please consult Beion Fluid
L Available for customized products for specialized parameters accordingly
Specification:
Valve Type | |||
Type |
Valve Size |
Moudle |
Flow Structure |
V20 |
19.050mm |
N/A |
2-Way NO/NC |
V20T |
19.050mm |
N/A |
2 Position 3 Way(T) |
V25 |
25.400mm |
N/A |
2-Way NO/NC |
V25T |
25.400mm |
N/A |
2 Position 3 Way(T) |
Remarks: *2-way Normally closed (marked as NC) *2-way Normally open(marked as NO) *3-way,one tube for NC, the other tube for NO(marked as T) | |||
Electric Parameters | ||||
Valve Type |
Voltage |
Power @ 70.F(21℃) |
Power for Energy-Saving Chip @ 70.F(21℃) |
Current @ 70.F(21℃) |
V20 |
12 VDC |
2.8 watts |
0.29 watts |
0.22 amps |
24 VDC |
2.9 watts |
0.29 watts |
0.10 amps | |
V20T |
12 VDC |
2.8 watts |
0.29 watts |
0.22 amps |
24 VDC |
2.9 watts |
0.29 watts |
0.10 amps | |
V25 |
12 VDC |
4.0 watts |
0.44 watts |
0.32 amps |
24 VDC |
4.0 watts |
0.44 watts |
0.16 amps | |
V25T |
12 VDC |
4.0 watts |
0.44 watts |
0.32 amps |
24 VDC |
4.0 watts |
0.44 watts |
0.16 amps | |
Remarks: 1.115VAC and 220VAC also available for customized 2. the eNergy-saving chip provides excess voltage for using to make the valve working (Ex. 24VDC circuit voltage can make rated voltage to be 12VDC to excess the voltage and work properly),after 110ms,the voltage will be reduced to 1/3 of original (Ex. 24VDC voltage shall be reduced to 8VDC),which can effectively shorten the response time and lower the heat of the valve body,also can keep the solenoid valve to properly working. | ||||
Options for Hole Size and Maximum Working Pressure | ||||||
Valve Type |
0.032" (0.80mm) |
0.046" (1.17mm) |
0.054" (1.40mm) |
0.062" (1.57mm) |
0.092" (2.34mm) |
0.125" (3.17mm) |
V20 |
20psi |
n/a |
20psi |
20psi |
N/A |
N/A |
V20T |
15psi(NC/NO) |
15psi(NC/NO) |
N/A |
N/A |
N/A |
N/A |
20psi(COM) |
20psi(com) | |||||
V25NC |
N/A |
N/A |
N/A |
30psi |
15psi |
10psi |
V25NO |
N/A |
N/A |
N/A |
30psi |
10psi |
N/A |
V25T |
30psi(NC/NO) |
N/A |
N/A |
30psi(NC/NO) |
N/A |
N/A |
60psi(COM) |
60psi(com) | |||||
Remarks: 1.All diaphragm valves can work under vacuum condition 2.Higher pressure,please kindly contact Beion Fluid 3.V20T series under EPDM or FFKM,10psi(NC/NO),15psi(COM) | ||||||
Internal Volume & Flow Capacity | |||
Valve Type |
Hole Size |
Internal Volume |
CV |
V20 |
0.032" |
19μl |
0.011 |
0.054" |
39μl |
0.027 | |
0.062" |
54μl |
0.030 | |
V20T |
0.032" |
45μl |
0.010 |
0.046" |
52μl |
0.023 | |
V25 |
0.062" |
55μl |
0.042 |
0.092" |
133μl |
0.080 | |
0.125" |
296μl |
0.105 | |
V25T |
0.032" |
47μl |
0.010 |
0.062" |
87μl |
0.028 | |
Response Time (Normally Closed) | |||
Valve Type |
Open Time(ms) |
Closing Time(ms) | |
Standard |
High Voltage Startup | ||
V20 |
15ms |
5ms |
8ms |
V20T |
Changeable |
||
V25 |
20ms |
7ms |
15ms |
V25T |
Changeable |
||
Remarks: 1.Test media is gas,it will be different from media to media 2.High voltage open and low voltage to maintain theory: diaphragm valve with high voltage (if the rated voltage is 12VDC,can use the voltage of 24 VDC) instantly startup,start circuit after 110ms,then reduce the voltage to 1/2~1/3 of original,the diaphragm valve still can work properly. 3. Start lower voltage through higher voltage can maintain the reduced power respectively to be 1/9 and 1/4 of original. | |||
Options for Wetted Materials of Diaphragm Valve | ||||
Valve Type |
Material for Diaphragm |
Material for Valve Body | ||
PTFE |
PPS |
PEEK | ||
V20 Series |
PTFE |
√ |
√ |
√ |
EPDM |
N/A |
√ |
√ | |
FFKM |
N/A |
√ |
√ | |
V20T Series |
PTFE |
√ |
√ |
√ |
EPDM |
N/A |
√ |
√ | |
FFKM |
N/A |
√ |
√ | |
V25 Series |
PTFE |
√ |
√ |
√ |
EPDM |
N/A |
√ |
√ | |
FFKM |
N/A |
√ |
√ | |
V25T Series |
PTFE |
√ |
N/A |
√ |
EPDM |
N/A |
N/A |
N/A | |
FFKM |
N/A |
N/A |
N/A | |
Remarks: 1. Material of valve body and diaphragm for V20 NO series can only be PTFE. 2. Material of valve body is PTFE and PEEK for V25-92 series and material of diaphragm is PTFE 3. Material of valve body and diaphragm for V25-125 series can only be PTFE. | ||||
Example for Product Type:
V20 |
NC |
24 |
- |
62 |
- |
4 |
- |
E |
T |
T |
T |
|
T |
|
T |
|
T |
Valve Size |
Working Status |
Working Voltage |
|
Hole Diameter |
|
Material of Coverplate(PTFE keep empty) |
|
Material of Didphragm (PTFE keep empty) |
1 |
Valve Size |
V20,V25 |
2 |
Working Status |
NC(2-way Normally Close),NO(Normally Open),T(2 position 3-way) |
3 |
Working Voltage |
12VDC,24VDC,115VAC,220VAC |
4 |
Hole Diameter(1/1000inch) |
32,46,54,62,92,125 |
5 |
Material of valve body (PTFE is standard valve body material) |
4(PPS),5(PEEKTM) |
6 |
Material of DiaPhragm (PTFE is standard diaphragm material) |
E (EPDM),P(FFKM) |