| Usage: | Battery Security Testing Machine |
|---|---|
| Power: | Electronic |
| Brand Name: | Amade-tech |
| Warranty: | 12 months |
| weight: | 200kg |
| Model Number: | AT-L5010 |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Battery Cell Forced Internal Short Circuit Tester
It is intended for simulation of forced internal short circuit of batteries under defined conditions to determine the security performance.
Standards: IEC62133
Main Parameters
It is intended for simulation of forced internal short circuit of batteries under defined conditions to determine the security performance.
Standards: IEC62133
Main Parameters
Model |
at-L5010 |
Temperature controlled chamber
|
Temperature range:0 ° C ~ 100 ° C Accuracy: ±0.1 °C Temperature fluctuation: ±0.5 °C Temperature uniformity: ±1.5 °C Heating rate: average 3 °C / min (from 0 ° C to 100 ° C, nonlinear no-load, average temperature rise) Cooling speed: average 1 °C / min (from 100 ° C to 0 ° C, nonlinear no-load, average cooling) Interior chamber dimension:W400H500D400mm Interior chamber material:304 stainless steel plate, test box bottom reinforcement |
Cell forced internal short circuit test system |
Test load: 0~1000N adjustable (usually use 400N and 800N) Load accuracy≤0.5%F.S Pressing sPeed range: 0.01~20mm/s adjustable, common test speed: 0.1mm/s |
Voltage acquisition |
RAnge: 0~10V REsolution: 1mV FRequency: 100Hz |
Cell forced internal short circuit test Pressing jigs |
2 Cylindrical battery test head is: 10*10*15mm stainless steel shaft+ 10*10*2mm nitrile rubber 2 Square or prismatic battery test head: 10*10*15mm stainless steel shaft+ 10*10*2mm nitrile rubber +5*5*2mm acrylic resin STandard pressure jig: Stainless steel shaft 10x10mm Nitrile rubber 10X10X2mm Acrylic resin 5X5X2mm Crush plate with arc groove for cylinder cell holding 2 Nickel particle
|