| Usage: | Abrasion Tester |
|---|---|
| Power: | Electronic |
| Brand Name: | Amade-tech |
| Warranty: | 12 months |
| weight: | 20kg |
| Model Number: | AT-L9001 |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Taber Type Abrasion Tester
Taber abrasion tester is used to determine the resistance of leathers, fabrics, textiles,cerameic, paper etc to abrasion.
ASTM D3884 Abrasion resistance of textile fabrics(Rotary platform, Double-head method)
ASTM D1175 Method of abrasion Resistance of textile fabrics
ASTM D1044 Test method for resistance of transparent plastics to surface abrasion
ASTM D4060 Abrasion resistance of organic coatings by the taber
TAPPI T476 Abrasion loss of paper and paperboard(Taber type method)
ISO 9352 Plastics determination of resistance to wear by abrasive wheels
ISO 5470-1 Rubber or plastic coated fabrics determination of abrasion resistance-part1 taber abrader
JIS K7204 Plastics-determination of resistance to wear by abrasive wheels
JIS A1453 Abrasion test method of building materials and building components (sand paper method)
JIS K6902 Testing method for laminated thermosetting high-pressure decoration
JIS L1096 Testing methods for woven and knitted fabrics
DIN 52347 Testing of glass and plastics, abrasion test, method using abrasion wheels and measurement of scattered light
DIN 53109 Testing of paper and board-determination of abrasion by the abrasion wheel method
DIN 53754 Testing of plastics, determination of abrasion, abrasive disk method
DIN 53799 Decorative laminated sheets on basis of aminoplastic resins test method
ISO 17076-1 Leather determination of abrasion resistance part1-taber method
Essential Parameters
Taber abrasion tester is used to determine the resistance of leathers, fabrics, textiles,cerameic, paper etc to abrasion.
ASTM D3884 Abrasion resistance of textile fabrics(Rotary platform, Double-head method)
ASTM D1175 Method of abrasion Resistance of textile fabrics
ASTM D1044 Test method for resistance of transparent plastics to surface abrasion
ASTM D4060 Abrasion resistance of organic coatings by the taber
TAPPI T476 Abrasion loss of paper and paperboard(Taber type method)
ISO 9352 Plastics determination of resistance to wear by abrasive wheels
ISO 5470-1 Rubber or plastic coated fabrics determination of abrasion resistance-part1 taber abrader
JIS K7204 Plastics-determination of resistance to wear by abrasive wheels
JIS A1453 Abrasion test method of building materials and building components (sand paper method)
JIS K6902 Testing method for laminated thermosetting high-pressure decoration
JIS L1096 Testing methods for woven and knitted fabrics
DIN 52347 Testing of glass and plastics, abrasion test, method using abrasion wheels and measurement of scattered light
DIN 53109 Testing of paper and board-determination of abrasion by the abrasion wheel method
DIN 53754 Testing of plastics, determination of abrasion, abrasive disk method
DIN 53799 Decorative laminated sheets on basis of aminoplastic resins test method
ISO 17076-1 Leather determination of abrasion resistance part1-taber method
Essential Parameters
Grinding wheel |
φ2(MAX.52mm)1/2(W) |
Center spacing of grinding wheel |
63.5mm |
the inner side of the grinding wheel center wheelbase spacing |
26±0.5 mm |
Rotating speed |
60rpm/72rpm |
Load |
250g 500g 1000g |
Counter |
0~999999 |
Volume/weight |
533231cm, 18kg |
Vacuum cleaner |
Optional with extra cost |
Power supply |
1 phase AC220V, 50Hz, 3A or specified |
Warranty |
12 months |
Standard configuration |
1. Main machine 1 set 2. Dust cleaner 1set 3. Grinding wheel H18 1pair 4. Special stickers 20 pcs 5. Special sand paper 5 pcs 6. Operation manual 1 copy |
Suggestions for GrindingWheel selection (other options please see the table below) |
Coating:CS-17,CS-10 Plastics:CS-17, H-18,H-22 HIgh-pressure decorative laminates:CS-32, CS-33 Textile fabrics:H-18, H-22 |