4-axis high-precision PCB depaneling router/ PCB separator machine

off- line PCB depaneling router Basic specifications

01. X, Y cutting speed: 0 ~100mm/s
02. Machine Repeat Accuracy: ± 0.01mm
03. X, Y1,Y2,Z Control Methods: Industrial IPC and PC
04. X, Y1,Y2,Z Drive Mode: AC Fiber Optic Servo Motor
05. Machine Operation and Data Storage: PC System
06. Cutting accuracy: ± 0.05mm
07. Spindle speed: Max 60000rpm
08. Host voltage: 220V 1ψ 50 / 60HZ
09. Air pressure supply: above 4.5kg/cm2
10. Power Consumption: 1.8KVA
11. Dust Collection: Lower Dust Collection (Standard) or Upper Dust
Collection
12. Dust collector voltage: 220V (380V) 3ψ
13. Upper dust collector size: L650*W400*H1350mm
14. Dust collector size: L665*W635*H1650mm

Features:

Double Y-axis workbench structure, the left and right workbenches are driven by servo motors and screw guides; the left and right workbenches can split different products at the same time, and the left and right workbenches can split different products at the same time, with different heights; it can meet small batches Production, avoid excessive repetitive actions and waste of replacing jigs, fast processing speed, high production efficiency, strong stability, greatly improve processing.

the double Y-axis worktable PCB pick-up area is equipped with grating safety facilities, and there is a transparent protective cover during the cutting process to avoid accidental injury to the operator by the broken knife and flying knife, and double protection for the personal safety of the operator.

 

1. the high-speed imported main shaft is used to cut and split the board, which greatly reduces the cutting stress, with high precision, low inertia and fast response.

2. Milling cutter detection system, real-time monitoring of the state of the milling cutter, effectively preventing the continued operation after the cutter is broken, etc.

3. Brand-new vision system, uniform ring light source, with brightness adjustment function, making various types of Mark points better recognized, suitable for plating Tin, gold-plated, copper-plated, tin-sprayed and various PCBs of different colors are equipped with visual alignment compensation functions.

4. the software can automatically adjust the height according to the thickness of the PCB and the toughness of the milling cutter to extend the service life of the milling cutter.

 

 

Equipped with upper and lower dust suction devices, using electrostatic brushes to seal the cutting points, and independently vacuum for single cutting points, greatly improving the dust suction effect.