Warranty: | 1.5 years |
---|---|
Certification: | CE ATEX |
Brand Name: | WNH |
Type: | Immersion Heater |
Condition: | New |
After-sales Service Provided: | No overseas service provided |
Power(W): | as required |
Voltage: | as required |
Weight: | as required |
Dimension(L*W*H): | as required |
Model Number: | WNH-Heater |
Place of Origin: | China (Mainland) |
Power Source: | Electric |
Product: | process heater |
Advantage: | Factory direct sell |
OEM/ODM: | Acceptable |
Packing: | wooden pallet or as required |
Custom design: | acceptable |
Heating medium: | Air/Gas/Water/Oil.etc |
Quick Details
Specifications
Feature of Non-explosion proof immersion heater
Max power of single heater up to 2000KW-3000KW, maximum voltage 690VAC
ATEX and IECExapproved. Exd, Exe, IIC GB, T1-T6
Zone 1 & 2 applications
Ingress Protection IP66
High quality anti-corrosion/high temperature heating element materials: Inconel 600, 625, Incoloy 800/825/840, Hastelloy, Titanium, Stainless steel: 304, 321, 310S, 316L
Design to ASME code and other International Standards.
over-temperature protection on heating element/flange/terminal box by using PT100, Thermocouple and/or thermostat.
Flanged connection, ease of installation and maintenance.
Design for Life in cyclic or continuous operation.
Application of Non-explosion proof immersion heater
Use in tank heating, usually for stagnant liquid to heat up and maintain at certain desire temperature. Multiple immersion heaters are used for a bigger tank dimension where heat distribution can be spread more widely. Temperature control by means of ON/off thermostat or contactor is adequate where precise control is not required.
Typical Applications:
Closed Drain Drum
Open Drain Drum
Separators
Storage Tank
Lube Oil Reservoir
Any other liquid mediums
Boiler Equipment
Bulk Liquid Storage Tanks
Calorifier Packages
Cleaning and Rinsing Equipment
Heat Transfer System
Hot Water Storage Tanks
Feature of Explosion heater
Max power of single heater up to 2000KW-3000KW, maximum voltage 690VAC
ATEX and IECExapproved. Exd, Exe, IIC GB, T1-T6
Zone 1 & 2 applications
Ingress Protection IP66
High quality anti-corrosion/high temperature heating element materials: Inconel 600, Incoloy 800/825/840, Hastelloy, Titanium, Stainless steel: 304, 321, 310S, 316L
NiCr 80/20 heating wires, single or double coils.
Design to ASME code and other International Standards.
Hair-pin element and sealing to tubesheet by means of Bite-Coupling or Direct Welding. When use with Bite-coupling, individual element can be replaced (offline).
over-temperature protection on heating element/flange/terminal box by using PT100, Thermocouple and/or thermostat.
Flanged connection, ease of installation and maintenance.
Design for Life in cyclic or continuous operation.
Explosion Proof
Applicationof Explosion heater
Immersion heaters from WNH are used for applications such as the following;
Lubricating oil heaters for turbines, compressors, pumps, refrigeration machines;
Heaters for heat transfer oil, heavy oil, fuels;
Container heaters for process water and emergency showers;
Heating of process gases;
Motor anticondesnation heaters;
Container and heating chamber heating .
Area:
Process heaters
Tank or lube oil heaters for large machines