1. Dry-running without damage

2. Molded parts are out of FRPP, CFRPP, PVDF applicable for various chemicals.

3. the lightweight form and mounting plate structure is suitable for in-tank applications. Easy to mount and maintain.

4. Vapor seal stops corrosive vapor to reach the motor bearing perfectly.

5. Closed impeller, fastened independent of rotational direction.

6. Shat separated from the fluid by a thick-walledthermoplastic protection tube.

7. Radial and axial forces are absorbed by reinforced motor bearings.

8. Corrosion protection bay a 2C protection paint coat.
9.Suitablefor chemical circulation,cooling, spraying, PCB etching,waste water and scrubberapplications.

10.Ideal for use in electroless nickelor copper plating and various solution circulation applications.

Identification for Model No.:

Model Desc.:        CS    -    32     E      P     -     750     -     3P       5       B                                         1              2       3        4               5                 6         7         8

1. Type:                   CS

2. in-Outlet:            25-1"                32-1-1/4"            40-1-1/2"

3. O-ring:                V-VITON          E-EPDM             N-NBR

4. Pump body:       P-FRPP            K-PVDF              C-CFRPP

5. Power:                550-3/4HP        7 50-1HP           1100-1.5HP            1500-2HP             2200-3HP

6. 3P:                      Three-phase

7. Frequency:         5-50HZ            6-60HZ

8. Baseboard:        B-Standard      F-Square              W-Out-tank           C-Outside         T-Special order

Model Parameter:

CE Certificate: