Usage: | Auto Testing Machine |
---|---|
Power: | Electronic |
Brand Name: | CME |
Warranty: | 1 year |
weight: | 1000~6000 |
Model Number: | KRD11 |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. the system meets the requirements of both shock and collision test, can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests.
Functions and features:
It is fully driven by air pressure and of Simple structure and high reliability. Environmentally, it causes no Contamination in order to keep the surroundings clean and tidy.
It is no need to switch between shock and bump as the measurement Controller can automatically complete the shock/bump test
It is driven by air pressure, which can greatly improve the efficiency of Shock test with a maximum shock speed of 120 times/min.
It can conveniently carry out large pulse width test and small overload Test.
It can be applied to replace the bumper as it is a structure of shock Table which has a fast speed. Compared with the motor-driven or hydraulic Bumper, this one is more reliable and produces better bump waveforms.
It controls the shock speed by adjusting air pressure, so it is easy to Adjust the bump speed.
the measurement and control software adopts KRD series of shock Measurement and control one, which can conduct manual operation, continuous Shock, single shock, intermittent stoke and implement various kinds modes of Shock that are convenient for user to choose from.
with a brake Mechanism built in and unlocking by air pressure applied, it is so tightly Locked when the electromagnetic valve is power off for its operation safety under any circumstances.
Model Parameters |
KRD 115 |
KRD 1115 |
KRD 1125 |
KRD 1150 |
KRD 11100 |
KRD 11200 |
KRD 11400 |
KRD 11600 |
KRD 11800 |
KRD 111000 |
KRD 112000 | ||
Rated Load (kg) |
5 |
15 |
25 |
50 |
100 |
200 |
400 |
600 |
800 |
1000 |
2000 | ||
Table Size (mm) |
150150 |
200200 |
300300 |
500500 |
600600 |
800600 |
800800 |
1000800 |
10001000 |
12001200 |
15001200 | ||
Peak Acc. (g) |
Half-Sine |
5-2.5k |
5-2k |
5-1500 |
10-750 |
10-600 |
10-450 |
10-400 |
10-300 |
10300 |
10250 |
10150 | |
Post-Peak Sawtooth |
10-200 |
10-100 |
10-50 | ||||||||||
Trapezoid |
\ |
15-200 |
15-100 |
15-60 |
15-50 | ||||||||
Pulse Duration (ms) |
Half-Sine |
0.540 |
140 |
0.660 |
1.560 |
260 |
2.560 |
360 |
3.560 |
460 |
4.560 |
660 | |
Post-Peak Sawtooth |
318 |
618 | |||||||||||
Trapezoid |
\ |
318 |
618 | ||||||||||
Bump Waveform |
Half sine wave | ||||||||||||
BumpPeakAcceleration (g) |
4~150 |
5100 | |||||||||||
BumpPulseDuration(ms) |
2~30 |
3~30 | |||||||||||
OverallDimension(mm) |
10001000 2100 |
12001000 2200 |
14001200 2300 |
16001400 2300 |
17001500 2300 |
17001500 2300 |
19001500 2450 |
19001500 2450 |
20001500 2450 |
19001800 2550 |
22001800 2550 | ||
Weight (kg) |
700 |
800 |
1000 |
1800 |
2500 |
2800 |
3800 |
4000 |
4800 |
5200 |
6000 | ||
Bump Rate (Times/Min) |
10~120 | ||||||||||||
|
Environment |
Temperature range 0 ~ 40℃; Humidity≤80%, non-condense | |||||||||||
Power |
AC220V±10%, 50Hz | ||||||||||||
Air source |
≤0.8MPa | ||||||||||||
Floor |
No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment | ||||||||||||
Standards |
MIL-STD-810F IEC68-2-27 |