KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and home appliances. the system adopts the principle of pneumatic energy storage expansion. by adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke.

for the classic drop test, it'S equipped with the corresponding shock amplifier to complete drop test.

 

L Windows-based stable control system, full-automatic remote-control interface

L Pneumatic cylinder drivingwith advantages of large driving force, short accelerating stroke, low cost and pollution free.

L Automatic control of lifting heightwith high accuracy and good repeatability

L Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter

L the most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator.

L Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small.

Technical Specifications

Model Parameters		KRD1350	KRD13100	KRD13200	KRD13500	KRD13800	KRD131000	KRD13-2000
Rated Load (kg)		50	100	200	500	800	1000	2000
Table Size (mm)		500500	600600	800800	10001000	12001200	15001500	20002000
Peak Acc. (G)	Half-Sine	10~1500		10-1000	10-500	10-400	10-300	10-200
	Post-Peak Sawtooth	10~200		10~100				10-50
	Trapezoid	15-200	15-200	15-100	15-100	15-60	15-50	30-50
Pulse Duration (ms)	Half-Sine	260	260	360	460	560	660	860
	Post-Peak Sawtooth	318			618
	Trapezoid	318		618
Bump Waveform		Half Sine Waveform
ShockPeakAcceleration(g)		5100
Shock Pulse Duration(ms)		330
Bump Rate (Times/Min)		10-120
Overall Dimension (mm)		120012001500	120012001500	120012001500	130013001600	150015001700	160016001800	200020001900
Weight (kg)		3000	3200	3400	4000		6000	8000
COndition	Environment	Temperature range 0 ~ 40℃; Humidity≤80%, non-condense
	Power	AC220V±10%, 50Hz
	Air source	≤1MPa
	Floor	Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm Shall be reserved around the equipment
Standards		IEC68-2-27  MIL-STD-202MIL-STD-750MIL-STD-810 MIL-STD-883UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580