1, Main features
1. Weighted fuselage, welded steel plate structure, vibration aging to eliminate internal stress, high strength and good rigidity
2. Standard 4 + 1 axis
3. High quality hydraulic integrated system, special hydraulic system for bending machine of Bosch Company, Germany, fully closed
Ring control slider synchronization and stroke
4. the oil cylinder adopts Japanese NOK / Swedish SKF / American Parker sealing ring, which has high speed and no oil leakage
5. Push pull type quick clamping device for upper die, high precision, quick and convenient die changing, greatly improving work efficiency
6. the Willa type mechanical compensation device is installed on the linear guide rail, which can slide left and right at will and stop at any position,
Auxiliary bending is easier and more efficient
8. Using Italian givi grating ruler, it can accurately measure the deformation and feedback compensation to ensure the bending accuracy.
the installation position is at the back of the slider to ensure that the workpiece of the bending machine will not collide with the grating ruler
9. Unique double linear guide design, accurate positioning, multi-stage gear design for rear gear finger, increasing the efficiency
Positioning range makes bending work more convenient.
10. Different CNC systems and non-standard grinding tools can be selected
2, Optional numerical control system
1. ESA S630 system in Italy
Characteristic:
1) Including 128MB DRAM
2) 10 Inch Touch screen display (resolution 1024x600)
3) 128MB SSD
4) Interactive 2D graphic editor for workpiece and die data
5) Two RS232 serial ports
6) 1 Ethernet port 10 / 100 Mbit (LAN connection)
7) 1 VGA interface for external display
8) 2 USB (2.0) interfaces
9) DC 24 V power supply
2. ESA s640 system in Italy
Characteristic:
1) 15 inch touch screen, supporting 6 + 1 axis
2) Interactive 2D graphic editor for workpiece and die data input
3) Two dimensional graphic display of frame, workpiece and die
4) the best bending sequence manual two dimensional figure recognition
5) Automatically check and calculate the relevant position, bending and compensation tonnage, and program each part in table mode
Axis position
6) Windows like user interface
7) Support computer off-line programming
3. Delem da-52s, Netherlands
1) One page parameter fast programming
2) Navigation shortcut
3) 7 "wide screen color TFT
4) Maximum 4-axis control (y1.Y2 and two additional axes)
5) Deflection compensation control of worktable
6) Mould / material / Product Library
7) USB peripheral interface
8) Advanced Y-axis control algorithm can control both closed-loop and open-loop valves
9) Panel mounting structure, optional suspension box
4. Delem da-53t
1) "Shortcut key" touch navigation
2) 10.1 "high resolution true color TFT display
3) up to 4 axis control (Y1, Ya + 2 auxiliary axes)
4) Deflection compensation control
5) Advanced Y-axis control algorithm can control both closed-loop and open-loop valves
6) Network two machine linkage (optional)
7) USB peripheral interface
8) Profile-53tl offline programming software
5. Delem da-58t
1) 2D touch graphic programming
2) 15 "high resolution TFT true color display
3) Bending process calculation
4) Deflection compensation control
5) Servo and inverter control mode
6) Advanced Y-axis control algorithm can control both closed-loop valve and open-loop valve
7) USB interface
9) Profile-58tl offline programming software
6. Delem da-66t
1) 2D touch graphic programming
2) 3D product graphic simulation display
3) 17 "high resolution TFT true color display
4) Complete windows application package
5) Compatible with delem modular structure
6) USB, peripheral interface
7) Application of user program in multitask environment
8) Angle detection sensor interface
7. Cybelec cybtouch 8 PS, Switzerland
1) Control 3 axes (4 axes function optional)
2) Hand animation 2D bend graphics (option)
3) Automatic calculation of allowable bends
4) Pressure = compensation automatic calculation
5) Modular settings for each step or bend
6) Angle and back stop correction
7) Wireless remote connection system via PC or notebook
8) the port is used for data transmission or backup
8. Cybelec cybtouch 12 PS, Switzerland
1) 4-axis control (y1-y2-x-r)
2) Manually define bending sequence to generate 2D products
3) Bending allows automatic calculation
4) Automatic calculation of pressure compensation
5) Modular settings for each step or bend
6) Calculation of upper die depth
7) Angle and back stop correction
8) Free PC offline programming software at random