Hydraulic dismounting shear/ vigorously eagle-beak shears

the whole is made of high-strength and wear-resistant plate,high strength, light weight, high pressure,with large diameter cylinder; the shear force is 20% higher than that of the same industry, the double-sided guide friction block can be adjusted at any time to ensure perfect cutting;the blade adopts high-toughness and high-strength steel, very sharp to cut anything,also interchangeable on both sides, which can be used repeatedly, greatly reducing the loss;the fully-new jaw design improves the cutting ability, to make the cut materials fall quickly.  

Adopting a rotating gear that can withstand heavy loads,the eagle-beak shears can continuously rotate 360°, to make the hydraulic shear always in a satisfactory position, allowing you to fully control the job site and improve work efficiency.
Product advantages:

1. New sharp point  

High-hardness materials are used to achieve high-efficiency cutting performance. the blades fixed with bolts on the sharp tip can be quickly replaced, reducing the replacement time.
2. Two-way operation

the movable jaw can be operated in two directions to ensure accurate alignment.

3. Newly designed jaw

the new design improves the cutting ability for the materials .
4. Automatic lubrication system

the eagle-beak of more than seven tons can be equipped with "automatic lubrication", which is a unique eagle-beak lubrication system, which can ensure that all moving parts are lubricated on time.
5. Forehead blade

the new fixed jaw design can increases the cutting capacity, and the forehead blade with a knife tip can ensure accurate cutting and achieve a satisfactory cutting force.
6. Special booster valve

Speed up the opening and closing speed, reduce the opening and closing cycle time, restart the power when needed, and reduce the pressure peak to protect the eagle-beak shear.

7. Brand new blade

All blades are redesigned into a rhombus shape to reduce the pressure on the jaws. the shear blades can be effectively exchanged for use on all sides, giving full play to the use value of the blades and saving the cost of wearing parts. the new blades fixed with high-strength bolts are convenient for replacement and installation. It can be easily replaced on site.

8. Central Hub Adapter Kit

the equipment has a unique central spindle design,which can adjust the position of the pin shaft at any time to ensure the shearing or cutting of the equipment. When the equipment is fully protected, the pin can be removed and all its parts can be inspected and repaired.

9. Rotary assembly with anti-cavitation valve

the rotating gear that bears the heavy load can continuously rotate 360°, to make the eagle-beak always in a satisfactory cutting position, allowing you to fully control the job site and improve work efficiency.

10. Newly high-power oil cylinder 

Fully new and better high-power forging cylinder, increases the size of the cylinder, which increase the cutting power by 20%, with higher safety. the inverted installation of the cylinder can fully protect the cylinder rod .