| Usage: | thermal shock testing chamber |
|---|---|
| Power: | Electronic |
| Brand Name: | HD |
| Warranty: | one year |
| weight: | 500kg |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Two zones thermal shock testing chamber
this chamber is designed to test samples for thermal impact of high and low temperatures by sharply dropping, in order to detect not only defects, but also to determine the operational durability and reliability of samples. Basket quickly moves from the cold to the hot zone and back, from one zone to another, is no more than 10 seconds.
Model |
HD-CTS2-01J |
HD-CTS2-02J |
HD-CTS2-03J | ||
Basket volume |
48L |
120L |
190L | ||
Basket dimensions (D*W*H) |
300*450*350mm |
500*600*400mm |
600*700*450mm | ||
ExternalDimensions (D*W*H) |
2250*1300*1950Mm(approximately) |
2750*1200*2000Mm(approximately) |
2350*1640*2640Mm(approximately) | ||
High temperature area
|
Temperature exposure range |
+60...+200℃ | |||
Preheating temperature upper limit |
200℃ | ||||
Heating time |
R.T...+200℃: 40min (approximately); | ||||
Low temperature area
|
Temperature exposure range |
0...-75℃ | |||
Precooling temperature lower limit |
-75℃ | ||||
Cooling time |
R.T....-70℃: 60min (approximately) | ||||
Basket
|
Temperature range |
-65...+150℃ | |||
Temperature fluctuation |
≤1℃ | ||||
Temperature deviation |
≤±2℃ | ||||
Conversion time |
≤10Seconds | ||||
Temperature recovery time |
≤5min. | ||||
Material | |||||
Shell material |
Cold rolled sheet steel, spray plastics on surface | ||||
Internal material |
Stainless steel | ||||
Thermal insulation material |
Polyurethane foam +glass wool | ||||
Refrigeration system | |||||
Refrigeration mode |
Mechanical compression, two-stage refrigeration | ||||
Cooling mode |
Water cooling | ||||
Compressor |
Imported compressor | ||||
Temperature sensor |
Pt100 | ||||
Controller |
Programmable logic controller,7'' LCD touch screen | ||||
Power supply |
AC380V 50Hz, Three-phase four-wire + earth wire | ||||