Large MUlti-purpose drying oven

Application:

  Applicable to electrical, electronics, instrumentation, materials, medicine and other scientific research, production units, mainly used for drying, baking, heat treatment, disinfection, insulation and other temperature tests.

 

Features:

  Testing chamber of drying oven is made of cold-rolled steel or stainless steel, and is manufactured by argon arc welding process. Double layers silicone rubber seals and mechanical locking devices effectively seal the test chamber. the shell of the drying oven is made of cold-rolled steel sheet, and the double sides electrostatic epoxy polyester powder is sprayed at 180℃for curing. the gap between the test chamber shell and the test chamber is filled with centrifugal glass wool felt to achieve the lowest heat loss.

  Customers can adjust the height of theshelf as needed to make more efficient use of space.

  Forced air convection duct structure; the air duct is located on the left side of the oven, and the control cabinet is located at the left of the oven.

 

Safety:

  Use SUS304 stainless steel electric heating pipe sealed heating, and set pressure relief safety door; have power supply leakage and heater short circuit protection, to ensure safe operation.

 

Technical parameter:

Model	HD-2006BDG	HD-202BDG	HD-302BDG
Volume	640L	2460L	2460L
Internal dimensions (D*W*H)	800 *800 *1000 mm	1100*1500*1600 mm	1100*1500*1600 mm
ExTernal dimensions (D*W*H)	1070*1300*1280mm	1440*2070*1900 mm	1440*2070*1900 mm
Performance
Maximum temperature	200℃			300℃
Minimum temperature	Room temperature  +20℃
Heating time	Room temperature....200℃ ≤ 60 min		Room temperature....300℃ ≤ 90min.
Temperature fluctuation	≤ ± 0.5℃
Temperature uniformity	≤ ± 2.5%
Controller	Digital temperature controller, with self tuning PIDFunction;
Heater	Nickel-chromium heating wire
Power supply	AC 380V/ 50Hz, Three-phase four-wire + earth wire
Power	5.5kW	17.5kW	17.5kW
Noise	68dB()	68dB()	68dB()