1.Intelligent program,optimize program,jacquard,intarsia,and partial jacquard with only one layer of representation,no need for two layers or three layers.
Enter any image to complete the pattern making.
There are special narrowing symbols for full needles.

2.Multi-gauge design
It can realize a variety gauge of fabrics by one machine.
Means one machine can knit more gauge of fabric
Currently, we have following gauges
16/14G:knit 16G,14G,9G
14/12G:knit 14G,12G,9G,7G
5/7G:knit 5G,7G,3.5G

3.Bilateral stitch function
the tightness fabric stitch can be controlled just input few figures can adjust the length of fabric two sides without manuaal repair which omproves the stability and consistency of the production.

4.Roller automatically start and stops
When the fabric checks that the tension is too large or too small, the system will automatically adjust the motor,to rotate or not,to ensure the consistency of the fabric's tension during the knitting process.

5.No waste yarn starting device function
Normal fabric can be direct knitting without the waste yarn,saving the time of waste yarn withdraw from the fabric by manually, and the cost of yarn,reducing half of operator, mean saving time and labour cost.

6.Fast speed, the maximum machine speed reaches 1.9m/s which greatly refresh the knitting efficiency of intelligent computerized flat knitting machine, during the knitting process,the roller automatically runs and reversals solving the problem that the facric are too thick to be pulled.

7.Smart course optimization
  for fabric with more narrowing, complex patterns and more movement which can be greatly reduced of carriage running mostly up to half.

8.Forced knocking over function
All needle knitting and half mailano fabric are prone to the industry problem of tuck stitch phenomenon which can be broken by forced knocking over function. Just under the intelligent system,start stop engine system to ensure that the fabric does not have stitch problems.