Advantage:

*  Material from Evonik Industries;

*  Excellent brightness and night visibility;

*  Anti-crack & strong tenacity;

*  Wear resistance is 2 times better than thermoplastic marking;

*  Excellent aging resistance;

*  Environment protection,100% solid content and no volatile substances.

 

Construction mode includes spraying application and screed application and extruded application.

Consumption (Actual consumption depends on the thickness of marking & Roughness of pavement & Local temperature environment )

 

Surface temperature 25℃	Spraying application (0.5mm-0.7mm)	Screeding application (1.2mm-1.5mm)
Thickness	0.6mm	1.2mm
paint	1kg/	3kg/
Hardner	15g/	45g/
Primer	150g/
Glass beads	0.5kg/	0.5kg/

 

 

 

 

 

 

 

 

 

 

Paint	Hardner	Surface temperature(℃)	Ratio of BPO	Surface dry time    (Min)	Curing time  (Min)
B component	White color Powder	5	750g-800g	25	50
		15	700g-750g	20	35
		25	650g-700g	10	20
		35	550g-600g	8	15

Dosage table of curing agent (Used in B component)

 

Technical Data:

Retroreflective valve:≥350 mcd(white)

Curing time:≤15minutes

Density (g/cm3):2

Abrasion resistance:≤35mg

Color:White/Yellow /Customize other colors

 

the matters needing to attention during the construction

1. Dry & Clean & flat of road surface.

2. Damaged road should be repaired before applying.

3. Before applying,should add the hardner according to the ratio to the MMA two-component

(Component B) pavement marking paint,then stir well.

4. Avoid breathing vapors,eyes and skin should not touch the coating.

5. during Construction,eating and drinking and smoking is prohibited.

 

Attention of construction

1. Clean and dry road surface.

2. Construction environment temperature is about 10℃ to 40℃, surface temperature generally

Is above 5 ℃.

3.  the curing time depends on the consumption of curing agent & the temperature of construction

Environment,but has nothing to do with the thickness of the coating.

4.  Strictly prohibited from direct sunlight during transport and storage,stored in ventilated

and shade and dry place,the storage temperature should be controlled in 0℃ to 40℃.

5. during screeding application,it is recommended that two scraper buckets be equipped for