for flat wire'S parameters:

1. Frequency control of the rolling machine: 4 kw ( Inverter sine. Motor Wannan)

Annealing DC annealing current:30V

2. Annealing power: 12KW.

3. Outer diameter ofRolling Wheel: 106mm.

4. Rated speed: 120 m / min

5. Maximum speed: 150 m / min

6. Inlet diameter: Φ 0.5- Φ 0.70mm

7. Automatic adjustment and shifting the line: protectRolling Wheel.

8. Completed Flat wire size: width:1-2.0 mm,   Tolerance: + / - 0.01

Thickness: 0.1- 0.20 Mm Tolerance: + / - 0.002

9. Constant voltage constant current annealing, gas protection.

10. the elongation is about30-40%.

11. Vickers hardness is about45 degrees.(Copper related)

12. Yield strength: about 50-55 (0.25x1.2)

for round wire'S parameters:

1.  Inlet diameter: Φ 0.27- Φ 0.37mm

2. Dimension of finished wire after tin coating: Φ 0.3 mm - Φ 0.4 mm

3. Tin thickness 0.01-0.02 mm / side

4. Elongation: ≥ 35%

5. Yield strength of finished product: ≤ 65 - 70MPa.

6. Linear speed: design speed: 150

7.  Use sPeed: 120-130