| Brand Name: | LiTCATAL |
|---|---|
| usage: | CO2 reduction |
| Weight: | 12kg |
| Temperature range: | -20-80 |
| Power supply: | 300W |
| Model Number: | CEL-PF300-T10 |
| Place of Origin: | China (Mainland) |
| SpectralOutput: | 300-2500 nm |
| Light intensity: | 1-20 Sun |
| Bulb lifetime: | 1000 Hours |
Quick Details
Specifications
CEL-PF300-T10 xenon lamp light source system is widely used in photolysis of water, photolysis of aquatic hydrogen oxygen production, CO2 reduction, photothermal catalysis, VOCs degradation, photothermal synergy, photochemical catalysis, photoinduced synthesis, photodegradation of pollutants, water pollution treatment, biological light, optical detection, various types of simulated daylight, visible light, ultraviolet light, monochromatic light acceleration experiments and other fields.
CEL-PF300-T10 xenon lamp light source intelligent system to achieve automatic power on, off, optical power density display, calibration and automatic adjustment, custom switch times and frequency, to achieve digital monitoring, program mode can be based on the requirements of different stages of the experimental time automatically adjust the light intensity at the right time (can fully simulate the changes in daylight throughout the day). Through the expansion module can be used remotely with software or cell phone applet to achieve real-time online monitoring of the light source.
Main parameters |
CEL-PF300-T10 |
CEL-PF300UV-T10 |
Light stability |
Fiber optic optical feedback achieves stable output of optical power density of xenon lamp light source; usiNg fiber optic to channel the calibrated optical output into Hamamatsu sensor, which can discard the temperature drift of Hamamatsu sensor and achieve stable long-term signal feedback and stable optical output. | |
Intelligent control system |
the working time and working light intensity of the light source can be adjusted automatically according to the demand; the temperature monitoring of the bulb, power supply, sensor and many other places to ensure the stable operation of the light source. | |
Working mode |
Regular use mode (without opening fiber optic optical feedback); fiber optic optical feedback mode; program intelligent mode; automatic mode, etc. | |
Optical power density display |
Test point with optical power meter calibration (factory calibration display, working distance 15cm), to achieve real-time display of the working optical power density value; K-factor correction function, can be based on the actual measured value of real-time correction of light intensity output. | |
Luminous spectrum range SpectralOutput(nm) (AULTT-P4000 measurement) |
300nm~2500nm (without ozone) |
200nm~2500nm (with ozone) |
Working spot diameter (optional continuous adjustment accessories) |
60mm or more |
60mm or more
|
UV Output, <390nm (Watts) |
2.6W |
6.6W |
IR Output, >770nm (Watts) |
28.8W |
26.8W |
Visible Output, 390-770nm (Lumens) |
5000Lu, 18.6W, 5600K |
4500Lu, 16.6W, 5050K |
Input Power(Watts) |
300W (Lighting voltage 30KV, working voltage 14V) | |
Working currentCurrent (Amps DC) |
21A (10A~22A, 18A recommended) | |
Total luminous output power |
50W (can replace the bulb quickly and safely by itself) | |
Lamp life Life (Hours) |
>1000H, Limit 6000H (dusty and humid environment will seriously affect the life) | |
Light output index |
Light sTability: <±1% | |
Temperature control system |
Light source system using multi-point temperature monitoring to ensure stable output of light source.Fan speed delay automatically adjusts according to the system temperature to stabilize the light intensity output. | |
Optional accessories |
CEL-LMP400 automatic lifting table; CEL-LB70 photochemistry experiment box CEL-NP2000-2A Intense light power meter | |
Optional quartz coated filter |
Conventional filters: UVIRCut400 (through 400-780nm), UVIRCut420 (through 420-780nm), Cut800 (through 800nm or more), AM1.5G (300-1100nm), AREF (full spectrum reflection, 200-2500nm), VisREF (standard with visible reflector. 350nm-780nm), UVREF (ultraviolet reflective sheet, 200-400nm). Bandpass filters: QD254, QD275, QD280, QD295, QD300-800, QD313, QD320, QD325, QD330, QD334, QD350, QD355, QD360, QD365, QD370, QD375, QD380, QD400, QD405, QD420, QD435 QD420, QD435, QD450, QD475, QD500, QD520, QD550, QD578, QD600, QD630, QD650, QD670.QD700, QD730, QD765, QD850, QD940 | |