Material: | acrylic |
---|---|
Usage: | Air Filter |
Type: | Non-woven Filter |
Brand Name: | YUANCHENKEJI |
Condition: | dust |
Model Number: | Acrylic-02 |
Place of Origin: | China (Mainland) |
Scrim: | 100% acrylic |
Weight: | 500gsm 550gsm |
Thickness: | 1.8-2.2mm |
Temperature: | Continue 120 degrees Peak 140 degrees |
Application: | Cement,Construction,Metallurgy |
Quick Details
Specifications
1.Brief Introduction of High Efficiency Filter Cloth
Filter bag fabric can not only filtrate the normal temperature gas,but also filter medium temperature gas(150 degrees).It is also ideal for acid and alkali corosive gas filter material.
Acrylic needle felt
2.We pay attention to following processing matters:
(1) Precise design required size of the filter cloth for filter bag parts, the filter cloth will larger than the actual amount design size, to leave a spare for weaving.
(2) to choose the right filter bag accessories, specifications and check its quality. the filter bag accessories should match the filter bag quality requirements.
(3) We make the filter bag line drawing, cutting, sewing on automatic production line. When the filter bag need manual processing, we will open it on the operation platform, and with certain pulling force to keep it is flat.
(4) We keep the strict processing quality standards, according to design drawings and operation process. Our worker meet the requirements of tooling and clothing, no smoking.
(5) We have the responsible for the processing of products, and examines, waste, residue, defective goods in the beginning.
Technical Specification | ||
Name/Quality |
100% Acrylic w/ PTFE membrane | |
Component |
Shell Fiber |
100% Acrylic (DT) |
|
Scrim |
100% Acrylic (DT) |
Weight |
550±5% GSM | |
Thickness |
2.0mm | |
Air Permeability/127Pa cm3/cm2.S |
4 | |
Tensile Strength N/5*20CM |
Length |
≥800 |
|
Cross |
≥1000 |
Elongation at break % |
Length |
≤25 |
|
Cross |
≤35 |
Temperature ( Celsius Degree) |
Continue |
125 |
|
Peaks |
140 |
Finish |
Heat Stabilization,Glaze, Singe, PTFE macerate,PTFE Membrane | |
Use Scope |
Cenment, Steel, Construction, Metallurgy; |
3.Remarks
1) the length of dust filter bags: can be customized
Usual size: diameter 100mm, 125mm, 130mm, 150mm, 180mm, 250mm ect.
2) Process Method: automatic sewing or welded
3)Prodction details:Double bottoms and reinforcement to make abrasion resistance.
Sewing thread: PTFE thread, polyester thread.
4)Inspection: Filter bags will be according to the national standards, industry
Standards and enterprise standards.
5) If your required filter bag is different from our usual one, then please send us your drawing picture and choose material you need since we also produce the nonstandard filter bag.
4.Advantages of the product:
1.Various material: Polyester(PE), Polypropylen(PP), Aramid, P84, Acrylic, PPS, Fiberglass, PTFE,Nomex,FMS etc.
2.Strong intensity
3.Excellent anti-abrasion,good finishing treatment
4.Good raw material, competitive price
5.High filtration efficiency
6.Fast delivery
7.Size can be customized
8.Factory manufacturer could contal quality and price
9.Strict quality inspection and contol
10.Professional designer teams to match with your operating condition
Application field:
in industry dust collection
- Power Plant or Stations
Filtered dust, waste incineration, Flue ash, discharging flue ash,Coal dus
- Building and Construction
Cement, iron and steel,furnace dust, gypsum, limestone, finely ground quartz,
Calcium hydroxide, lead monoxide, quicklime, acid crystals, Pure clay, phosphates, magnesite concentrate, finely ground ,fluorid, production of aluminu
- Chemical Industry
Thomas meal (Fertilizer) ,Rubber compounds, sinter dust, catalysts ,Sodium sulfate
Soap powder
the Non Woven Filter Media packaging:
Different types of non woven filter fabrics must be individually packaged. In general, it is wrapped in plastic bags for water proof.
FRQ:
Q1. What is your terms of payment?
A: T/T will usually be accepted,details could be negotiated.
Q2. What is your terms of delivery?
A: FOB, CFR, CIF, DDU,EXW
Q3. how about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. the specific delivery time depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q5. What is your sample policy?
A: we could offer the sample for free charge but do not pay the cost of freight.
Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q7: how do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them.