Dust collector bag industrial filter bags PTFE filter material for chemical industry coal-fired boiler

1. Factors affecting the service life of dust bag

1. the amount of flue gas

the area is small and the wind speed is large, which leads to the increase of the pressure of the dust bag. over time, it will cause wear and damage to the dust filter bag. the quality of coal determines the amount of flue gas, and the amount of flue gas directly affects the service life of the dust collection bag

2. Smoke content

after the dust enters the dust collector, due to the difference in diameter and weight, some dust with a relatively large diameter will fall under the influence of gravity, and the dust with a relatively small particle size will generate kinetic energy under the action of wind speed. When dust is intercepted on the filter bag or adhered to the surface of the filter bag, it will have a strong impact on the filter bag. Driven by kinetic energy, the dust constantly washes the filter bag. If the smoke content is relatively large and the wind speed is also high, the dust filter bag will withstand tens of thousands of frictions, causing the fibers on the surface of the filter bag to fall off.

3. Soot particles

According to the particle size of the dust, it is divided into three types: coarse dust, fine dust and micro dust. the particle size is different, the impact force on the dust filter bag is also different. When the dust content has acidic and alkaline values, it is intercepted by the bag due to its small diameter. It cannot fall off from staying on the surface of the filter bag or enter the inside of the filter bag. after interacting with water, it will stick to the surface of the filter bag, causing corrosion of the filter bag.

4. Types of smoke and dust

Dust can be divided into organic dust, inorganic dust and mixed dust according to its category. for the analysis of inorganic dust, there are mainly FeA, CaO, MgO, Si02, and elements. among them, the two elements that seriously affect the filter bag are Si02 and Fe203. under the action of wind speed, the scouring frequency of the filter bag is high, and the damage of the filter bag is increased.

5. Temperature indicators

the filter material can be divided into normal temperature filter material, medium temperature filter material and high temperature filter material according to the amount of temperature it withstands. Generally speaking, the high temperature that can withstand is about 200℃~300℃, and the temperature tolerance of the glass fiber filter material is 300℃, but the working temperature should be controlled at about 260℃.

6. the distribution of airflow

the distribution of airflow is also an important factor affecting the quality of the filter bag. If the dust removal equipment is designed due to unreasonable airflow, the local airflow is too large. Working under such conditions will cause damage to the filter bag. the usual solution is to design a baffle in the dust collector to change the direction of the airflow.

2.Measures to extend the life of filter bags

1. Appropriate filtering wind speed

Generally, when the dust concentration is high, the wind speed of the filter should be lower, and vice versa. the smaller the dust particles, the lower the wind speed of the filter, and vice versa.

2. Pre-spray to prevent oil adhesion

When the boiler is ignited and operating under low load, it usually takes a long time to drain the oil. If the filter bag is not pre-treated when the oil fume passes through the filter bag, it will cause irreversible damage to the filter bag.

3. Correct injection pressure and pulse width

Adjust the appropriate blowing pressure and pulse width to avoid excessive blowing pressure.

4. Suitable exhaust temperature

Strictly control the change of exhaust temperature to prevent it from being too high or too low.

5. Temperature indicators

the filter material can be divided into normal temperature filter material, medium temperature filter material and high temperature filter material according to the amount of temperature it withstands. Generally speaking, the high temperature that can withstand is about 200℃~300℃, and the temperature tolerance of the glass fiber filter material is 300℃, but the working temperature should be controlled at about 260℃.

3. Certificate available

Hazardous waste management license
Environmental management system certification
ISO14001:2004
ISO9001:2008
OHSAS18001:2007
CNAS Laboratory
CE Certificate

4. Application field:

Yuanchen products are widely used in purifying dusty air in industries like Metallurgy, Steel, Cement, Mechanical, Electricity, Chemicals, Waste Incineration, Concrete Mixing and Other conditions of complex industries.
Yuanchen Filter Bags are sold very well both domestic and abroad, highly praised by our customers.
We can supply you with the product in large quantity at wholesale prices.
and best after-sales service provided after order confirmed.

5. the baghouse needle felt filter bag packaging:

Different types of filter bag must be individually packaged. In general, it is wrapped in plastic bags for water proof, then put in a carton. Filter bag must be neat and regular packing, with the ring of the filter bag to avoid ring flat compression deformation. For the requirement to keep the shape of filter bag, it must fill padding for filter bag inside. Any other packing ways also be accepted up to you.

6.Our service  

1).Various material: Polyester(PE), Polypropylene (PP), Aramid, P84, Acrylic, PPS, Fiberglass, PTFE, Nomex, FMS etc.

2).Strong intensity

3).Excellent anti-abrasion, good finishing treatment
        4).Good raw material, competitive price

5).High filtration efficiency 

6).Fast delivery

7).Size can be customized

8).Factory manufacturer could control quality and price

9).Strictquality inspection and control

10).Professional designer teams to match with your operating condition