| Connection: | Female |
|---|---|
| Brand Name: | ANSEN |
| Type: | Union |
| Technics: | Casting |
| Material: | fiberglass fabric with polyurethane resin |
| Place of Origin: | China (Mainland) |
| Product name: | Pipe repair bandage |
| Place of origin: | China |
| Material: | fiberglass impregnated with polyurethane resin |
| Color: | White,black |
| OEM Service: | support |
| Sample: | free offered |
| Width: | 5cm,7.5cm,10cm,12.5cm,15cm |
| Length: | 150cm,270cm,360cm,460cm |
Quick Details
Specifications
DESCRIPTION
Ansen pipe repair bandage is a fibre reinforced polyurethane repair tape designed for the rapid repair of cracks and leaks in most types of pipework encountered in the engineering,chemical,marine and other industries.
Ansen pipe repair bandage works on wet,dry,dirty or corroded pipes even works under water...Salt or fresh activated by water it cures to produce a tough chemical resistant wraparound pipe.
Easy to useNo mixing,repaired pipes can be returned to service in less than thirty minutes.
Long Lasting Pipe Repair Bandage White 100mm x 3600mm - Emergency Fiberglass Resin Impregnated Black Pipe Repair Tape
Resistantto most chemicals including: mek, acetone,sulphuric acid,ethyl alcohol,gasoline,toluene,diesel,varsol,crude oil,hydraulic oil...
TECHNICAL DATA
√ Withstand temperature up to 120-150°C
√ Repairs leak in 30 minutes
√ Withstand pressure up to 3.1 Mpa/31bar/450psi
√ Repairs leak in 30 minutes
√ Withstand pressure up to 3.1 Mpa/31bar/450psi
√ Tensile Strength: 5075Psi
√ Hardness: 70 Shore D
√Pipe diameter up to 60 (1524 mm)
√ Ideal for pipe reinforcement & corrosion protection
how to use
√ Hardness: 70 Shore D
√Pipe diameter up to 60 (1524 mm)
√ Ideal for pipe reinforcement & corrosion protection
how to use
1.Shut off the pressure and isolate leak. Clean, degrease and abrade substrate around leak site.
2.Work putty until a uniform mixture is evident.3.Apply mixed putty immediately to leak site. Firmly press putty into defect.
4.Put on gloves supplied with the Pipe Repair Bandage. Immerse Bandage in water or place under running tap water
for 10 secs.
5.Wrap the Bandage tautly around the leak site extending 50mm either side of damaged area.
6.Smooth the resin as it foams during curing and work resin into the base fabric in a 'tightening motion'. Restore pipe toService once Bandage is cured.
