Overview of 5HG UniversAl Vertical Milling Machine

Milling machine is a machine tool with a wide range of uses. It can process plane (horizontal plane, vertical plane), groove (keyway, T-shaped groove, dovetail groove, etc.), tooth splitting parts (gear, spline shaft, sprocket), spiral surface (thread, spiral groove) and various curved surfaces. In addition, it can also be used to process and cut off the surface and inner hole of the rotating body. When the milling machine is working, the workpiece is installed on the workbench or indexing head and other accessories. The rotation of the milling cutter is the main motion, supplemented by the feed motion of the workbench or milling head, the workpiece can obtain the required machining surface. Because it is multi edge intermittent cutting, the productivity of the milling machine is high. In short, milling machine is a machine tool that can mill, drill and bore workpieces.

1. the machine has compact structure, small volume and high flexibility. the milling head can rotate 90 degrees left and right and 45 degrees back and forth. the thick pillow can not only stretch back and forth, but also rotate 360 degrees in the horizontal plane, which greatly expands the effective working range of the machine tool.

2. the machine adopts high-grade mihanna cast iron, with strong structure, no deformation and good stability. the spindle is made of chromium molybdenum alloy. after quenching and tempering heat treatment and precision grinding, it is equipped with precision grade oblique angle ball bearing combination, which has strong cutting force and excellent precision.

3. X-axis and y-axis slideway wear-resistant pieces have the advantages of light operation, low wear rate and durability. the worktable is precisely ground after quenching and hardening, which is not easy to wear.

4. Manual oil pump shall be equipped for centralized lubrication of worktable and lifting table. Equipped with improved electrical box and controller.

Characteristics of 5HG UniVersal Vertical Milling Machine

1.the machine tool has the advantages of compact structure, small volume and high flexibility. the milling head can rotate 90 ° left and right and 45 ° back and forth. the RAM can not only expand back and forth, but also rotate 360 ° in the horizontal plane, which greatly expands the effective working range of the machine tool.

2.the machine adopts high-grade mihanna casting, with strong structure, no deformation and good stability. the spindle is made of chromium molybdenum alloy. after quenching and tempering heat treatment and precision grinding, it is equipped with precision grade oblique angle ball bearing combination, which has strong cutting force and excellent precision.

3.Triaxial angle tooth seat nut is made of high-grade phosphor bronze, with good wear resistance and long service life  .

4.X,Y-axis slideway is attached with wear-resistant plate, which has the advantages of light operation, low wear rate and durability.

5.the worktable is precisely ground after quenching and hardening, which is not easy to wear.  

6.Equipped with manual oil pump for centralized lubrication of worktable and lifting table  .

7.Equipped with improved electrical box and controller, with 24V, 110V and 220V output sockets.

8.Pneumatic broach device can be selected to realize 2-second tool change, high efficiency, fast and safe.  

*Standard accessories: pull rod, toolbox and adjustment tools, front and rear slag retaining rubber, electric box and controller.

*Special accessories: electronic automatic tool feeder, digital display ruler, milling machine screwdriver, nozzle, code iron, quartz lamp, cooling system.

Technical parameters are detailed in the table.

PRODUCT DELIVERY