| Application: | Wire Stripper |
|---|---|
| Material: | Carbon Steel |
| Type: | Combination Pliers |
| Brand Name: | Changzhi Tools |
| Surface Treatment: | Steel |
Quick Details
Specifications
the first side of the crimp pliers is used for peeling, and the pliers should have a clearance of about 1.5 mm when closing the pliers. the second is a clipping without a gap. the space in the middle of the "convex" shape is used to press the line, insert the crystal tip into it, and then see if the 8 serrations are just aligned with the copper sheet. Do not press hard, or the crystal head will be scrapped.
in the production process of network cables, crimping tools are one of the indispensable tools and the main contributors to ensuring the smooth flow of the network. Crimp clamps are not only used to press mesh wires, but also to complete the three tasks of wire cutting, stripping and crimping.
When crimping, note that each wire should be pushed to the front of the crystal head, and the outer skin of the mesh wire should also enter the crystal head at a speed of two to three centimeters. the aim is to prevent the threaded head from falling off and to increase the contact surface. the eight wires do not need to be stripped, they are pressed tightly, and the copper sheets in the crystal will be embedded in the wires and in contact with the copper wires.
in the production process of network cables, crimping tools are one of the indispensable tools and the main contributors to ensuring the smooth flow of the network. Crimp clamps are not only used to press mesh wires, but also to complete the three tasks of wire cutting, stripping and crimping.
When crimping, note that each wire should be pushed to the front of the crystal head, and the outer skin of the mesh wire should also enter the crystal head at a speed of two to three centimeters. the aim is to prevent the threaded head from falling off and to increase the contact surface. the eight wires do not need to be stripped, they are pressed tightly, and the copper sheets in the crystal will be embedded in the wires and in contact with the copper wires.