You can then manipulate your tone via the 4-pole Moog Ladder Filter Section an LFO section a VCF modulation section a VCO modulation section and adjustable Envelope section

the Werkstatt-1: Moogfest 2014 Kit is a patchable and compact, one Oscillator analog synthesizer. It was originally created as a kit, to be The foundation for exclusive " Engineering VIP" workshops at Moogfest 2014. Due to a number of requests, Moog is offering a No-soldering-required version of the Werkstatt-1: Moogfest 2014 Kit.Assembly is extremely simple: Any user can quickly build an analog Synthesizer based on classic Moog circuits, and if desired, study the Analog circuits. Werkstatt was created to be an educational tool, but it Is also a formidable, compact analog synthesizer from Moog.

this Site also features our current research and lessons surrounding the use of subtractive synthesizers in STEM and STEAM high-school classrooms. Lessons in these studies are focused on project based learning Opportunities, and encouraging a creative deployment of practical skills In these fields. All lessons and associated materials are open source and available online for educators across multiple disciplines.

Analog Synthesizers have long had their own maker culture born of curious Engineers, physicists and hobbyists who have created and crafted their Sounds through electronic experimentation. It is our goal to share our Love for learning, music, and electronics by encouraging everyone to Create the world they want to hear, one mod at a time.

OSCILLATOR SECTION

Single VCO w/ frequency control (8Hz to 16KHz)

Saw and square waveshapes w/ control for square pulse width

Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control

Ability to PWM the square wave

FILTER SECTION

Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)

Select between the Envelope generator and LFO as Mod Source.

Polarity switch (+/-) and amount knob for control of filter cutoff modulation

LFO SECTION

Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)

VCA/AMP SECTION

Select between the Envelope Generator or on (Drone)

ENVELOPES SECTION

Controls for Attack & Decay time w/ Sustain On/off switch

KB SECTION

One octave low-note priority legato keyboard w/ glide control

PATCHBAY

VCA Input0V to +5V in VCA EG Mode, +/-2.5V in VCA on Mode

VCF Input-5V to +5

VCO LINEAR FM Input+/-2.5V -NOTE:this is an inverting control input

VCO EXPONENTIAL FM Input-5V to +5V, 1V/Octave trimmable

LFO CV Input5V to +5VNOTE: Negative CV slows LFO more than the panel

VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF

2x KB CV Output3V/semitone from 1 keyboard -NOTE: Attenuate for 1V/Octave

2x TRIG Output5 msec pulse, 0 to +5 V signal generated from low-note priority

2x GATE Output0 to +5V signal generated from low-note priority

2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator

2x LFO Output-2.5 to +2.5V Triangle or Square wave, selected via LFO Switch

2x VCF Output-2V to +2 V signal for audio or CV uses

2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch

Rear Panel

AUDIO OutputNominal +/-1.5V Signal

POWER+12VDC Center Positive w/ 1.2A Wall transformer

POWER CONSUMPTION1.8 Watt AVG