E70C-6M H4

 

AWS A5.18E70C-6M H4

 

Description:

E70C-6M Is a metal type of flux cored wire for flat and horizontal position welding. Slag quality is almost the same as solid wire and multiple pass welding can be performed without removing slag. 20% higher productivity can be achieved when compared to solid wires and it features good penetration, high resistance to porosity, good wetting behavior as well as low hydrogen contents.Typical applications include machineRies,Shipbuilding, offshore structures, bridges and general fabrications,  suitable for semi-automatic, automatic, single and multiple pass welding.

  

Diameters: 1.2mm, 1.4mm, 1.6mm

 

Typical Mechanical Properties:

Tensile strength(MPa):	590
YieldStrength(MPa):	520
Elongation(%):	27
Impact values(≥47J/-20℃):	85

          

TypicalChemical Compositon:

C	Mn	P	S	Si	Ni	Cr	Mo	V
0.04	1.47	0.013	0.012	0.80	--	--	--	--

 

Welding Current:(DC+)

Diameter(mm)			1.2	1.4	1.6
Current/A		--	140-300	150-360	180-400
Voltage/V			20-32	20-34	20-38
Gas speed/(L/Min)			20-25	20-25	20-25

 

Note:

1. Shield gas:  80% Ar +20% CO2;

2.Wire extension length: 15-25mm

3. Stock in dry environment, please use up in short time once opened.