E81T1-Ni1

 

AWS A5.29: E81T1-Ni1M-JH4

AWS A5.36 E81T1-M21A6-Ni1-H4,

 

Description:

E81T1-Ni1 isDesigned for gas-shielded flux cored welding of low alloy steels that require good toughness atlow temperatures. This alloy is excellent for single and multiple pass, all positional welding with good operation properties like easy slag removal, stable arc, less smoke and spatter etc. Welding for 500MPa grade high strength structural steel, like vessels, machine manufacturing, petrochemical industries and structural bridges etc.

 

Diameters:

1.0mm, 1.2mm, 1.4mm, 1.6mm.

 

Typical Mechanical Properties:

Tensile strength(MPa):	610
YieldStrength(MPa):	530
Elongation(%):	25
Impact values(≥27J/-30℃):	103

     

TypicalChemical Compositon:

C	Mn	P	S	Si	Ni	Cr	Mo	V
0.055	1.35	0.012	0.007	0.40	1.01	--	--	--

 

Welding Current:(DC+)

Diameter(mm)		1.0	1.2	1.4	1.6
Current/A		60-200	80-300	150-400	180-450
Voltage/V		15-25	15-32	20-40	22-42
Gas speed/(L/Min)		20-25	20-25	20-25	20-25

 

Note:

1.Shield gas: 80% Ar + 20% CO2

Wire extension length: 15-25mm

Thermal input: 0.8-1.8KJ/mm, thick plate welding should be preheat.

Rusty, oil stains, water and other impurity  on the weld parts must be cleaned before welding.

Stock in dry environment, please use up in short time once opened.

E81T1-Ni2

 

AWS A5.36 E81T1-Ni2

 

Description:

E81T1-Ni2 isDesigned for gas shielded flux cored welding of low alloy steels that require good CVN toughness atlow temperatures.It is excellent for single and multiple pass, all positional welding with good operation properties like easy slag removal, stable arc, less smoke and spatter etc.Welding for 550MPa grade high strength structural steel, like vessels, machine manufacturing, petrochemical industries and structural bridges etc.

 

Diameters:

1.2mm, 1.6mm

 

Typical Mechanical Properties:

Tensile strength(MPa):	610
YieldStrength(MPa):	530
Elongation(%):	24
Impact values(≥47J/-20℃):	107

     

TypicalChemical Compositon:

C	Mn	P	S	Si	Ni	Cr	Mo	V
0.050	1.20	0.012	0.007	0.40	2.10	--	--	--

 

Welding Current:(DC+)

Diameter(mm)		1.0	1.2	1.4	1.6
Current/A		60-200	80-300	150-400	180-450
Voltage/V		15-25	15-32	20-40	22-42
Gas speed/(L/Min)		20-25	20-25	20-25	20-25

 

Note:

1. Shield gas: CO₂ ; Gas purity: ≥99.95%.

2.Wire extension length: 15-25mm

3.Thermal input: 0.8-1.8KJ/mm, thick plate welding should be preheat.

4.Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.

5.Stock in dry environment, please use up in short time once opened.