Double wire chain link fence machine from China zhihaomachinery

Working Principle
1. the wire is taken in from the pay-off stand and passed through the dies where the diamond size takes place.Different gap sized.
2. after passing from the die, the diamond pattern wire is automatically thrown on the winding      
Shaft in the stitching process.
3. Once the stitching is complete, the woven is manually glided down to enable the next switch to take place.
4. the chain link is automatically wound to form rolls when the desired length is setted.
5. One side or both side of the end of net hole is twisted or with burr in edge.
6. Use rolling side machine to make it into rolls.

Advantage
1. the chain link fence machine is controlled by PLC automatic controller, so only one person is needed to      
Operate it.
2. One wire feeding which can reduce the breakdowns.
3. Wide width weaving scope: 1.3-4.5mm.
4. the high productivity for this machine can be 100m2/h.
5. the width scope can be 600-4000mm, and we can customize it for you.
6. the mesh size can be 25x25-120x120mm, and can be changed according to the mould.

Main Parameter:
Wire Diameter1.3-4.5mm
Mesh Size25x25-120x120mm
Width600-4000mm
Production60-120 m2/h
Voltage380V 415V 50HZ 3phase
Motor3.8KWX1 servo motor,1.5KWX3,0.75KWX3
Exterior size3800x2400x1500mm
Weight2000kgs