HX polystyrene board exterior wall insulation system features:

EIFS system is a lightweight thermal insulation system composed of multi-layer materials, which creates a continuous and non-discontinuous cladding structure for the outer wall of the building envelope, endows the wall with a high thermal resistance value, thus creating excellent low energy consumption or energy saving effect of the building. at the same time, unitrust EIFS system also provides effective protection for buildings and richer design of finishes.

Unitrust EIFS system consists of expanded polystyrene board or extruded polystyrene board insulation layer, polymer modified bonded mortar bonding layer, mechanical anchor for auxiliary use when necessary, polymer modified plaster mortar (built-in alkali resistant glass fiber mesh cloth) protection layer and finishing layer. According to the surface condition of the base or the height of the floor, the system can be installed by pure bonding mode or the combination of bonding and auxiliary mechanical anchorage.

System security without cracking

Using polymer modified bonded mortar, its quality can be effectively controlled in industrial production, not affected by site construction, coupled with the modified material excellent adhesion, waterproof, so as to ensure the overall quality of the system. the system can be fixed by combining bonding and mechanical anchoring, so that the system is more safe and reliable, especially suitable for the needs of external insulation of high-rise buildings.

Persistent insulation

the polystyrene insulation board adopted by Hengxin system has a very low water absorption rate in the natural environment, and the excellent waterproof property of polymer plaster mortar ensures the lasting and stable thermal insulation performance of the insulation system.

Strong resistance to impact

the composition materials of hengxin external insulation system have good performance, so that the whole composite system has high compressive performance and impact toughness, and better impact resistance than the general wall.

Wide applicability

It is not only suitable for external wall insulation of new buildings, but also for energy saving reconstruction of existing buildings.

A. Basic wall: concrete, porous clay brick, aerated brick or original face brick, Mosaic, etc., leveled with cement mortar.

B. Bonding layer of polymer modified bonding mortar

C. Thickness of expanded polystyrene board (EPS board) (30~100mm)

or extruded polystyrene board (XPS board) thickness (20~60mm)

Anchor bolt fastener

D. Polymer modified coating mortar

E. Alkali resistant glass fiber mesh cloth

F. Act the role of the surface