Product introduction

Rubber water-stop steel is developed by our company can be successful with a high sealing water stop to adapt to the large deformation characteristics, it has been at home and abroad are widely used in water conservancy project, the dam

Culvert, the subway tunnel, high-rise building basement of facilities such as deformation,

Effectively prevent leakage between the building structures, thus ensuring the quality of the project

Product performance and waterproof characteristics

the steel edge water stop belt has two wings with thin plate. When it is bonded with concrete, the steel plate on both sides and the surrounding concrete structure as well as the steel plate and rubber have strong bonding force. When the structure is deformed, there is only partial deformation of rubber and it is elongated and thinner, and there will be no new leakage between steel plate and concrete, steel plateand rubber. Therefore, the steel edge rubber waterstop enhances the per meability

Performance of structural deformation. the waterproofing principle of the steel edge waterstop first depends on the middle rubber section between the concrete deformation joints to be compressed or stretched, and plays the role of sealingwater stop. On the other hand, the steel belt and concrete have good adhesion, so that the water stop member can withstand larger tension and torsion, so as to ensure that the water stop member will not loosen and fall off in the effective deformation range of concrete, improve the effect of water stop. At present, the steel edge waterstop is widely used in Germany, the United States, the Netherlands, Japan and China's engineering field.

Product structure

Steel edge rubber waterstop products have the best geometric shape and size, structure is rubber body two sides insert galvanized steel belt by hot vulcanization process formed steel belt and rubber complex, from the steel edge two outer 30mm spacing with φ3mm installation hole for wire lifting fixed waterstop