Gearlink's 400-Gbps QSFP-DD DR4OPtics Transceiver Module with Quad Small Form-Factor Pluggable. Double Density (QSFP-DD) form-factor is of high performance in bi-directional signal transmission and aggregate 400Gbps bandwidth, which is designed to follow MPO QSFP DD MSA and 400GBASE-DR4 of IEEE 802.3bs standard and ultra-low power consumption of 8 W for 400G QSFP-DD D`R4+ are also proven.

 

Compared with the conventional copper-based direct attach cables (DACs), the 400g dr4 optical fiber with pluggable MPO connector enables the ease of complicated data center cabling deployment by the longer, lighter, and bendable characteristics. the 400g dr4 transceiver utilizes high-performance 1310-nm EML and PIN PDs with superior integration in signal integrity and optical sub-assembly, whose bit-error rate is better than 2.4 E-4 for reliable packet communication within the data center.

 

Technical Specification of QSFP-DD 400G DR4 500m MPO

 

Absolute Maximum Rating

Not necessarily applied together. Exceeding these values may cause permanent damage. Functional operation under these conditions is not implied.

 

Parameter	Min	Max	Unit	Note
Storage Temperature	-40	85	oC
3.3V Power Supply Voltage	-0.5	3.6	V
Data Input Voltage- Single Ended	-0.5		Vcc+0.5
Control Input Voltage	-0.5	3.6	V
Relative Humidity	5	85	%
Rx Optical Damage Threshold / Lane	5		dBm

 

Notes of 400g dr4 mpo qsfp:

 

1. Non-condensing.

 

Recommended Operating Conditions

Parameter	Min	Typical	Max	Unit	Note
Case Operating Temperature	0		70	oC
Power Supply Voltage	3.135	3.3	3.465	V
Date Rate per Channel			53.125	Gbps
Bit Error Ratio (BER)			2.4x10-4		1, 2
Control Input Voltage High	2		Vcc+0.3	V
Control Input Voltage Low	-0.3		0.8	V
Two-Wire Serial (TWS) Interface Clock			1	MHz
Rate
Differential Data Input / Output Load		100		Ohms	+/- 10%
Link Distance			500	m

 

Notes of 400g dr4:

 

1. Bit-Error-Rate (BER) is tested with the PRBS 31Q pattern.

 

2. 400G QSFP-DD DR4 requires an electrical connector compliant with QSFP-DD MSA which is used on the host board in order to guarantee its electrical interface specification.

 

Parameter of QSFP-DD 400G DR4 500m MPO

 

If you want to know more about, please visit our website.