Working process of automatic corn packaging machine SW-ABF-1200 1. Automatic sorting of empty packaging bags: the whole process can be successfully completed in the next process only after the opening of the bag is processed by the bag opening equipment. the packaging bag must be coated on at least one side, and adsorption cannot be completed without coating. 2. Transfer (suction) process: the empty packaging bag is sucked up by the vacuum chuck, moved forward to the preset position, and waited for the next process to be completed. 3. Bag opening process: the vacuum sucker presses the packaging bag from the upper and lower sides at the same time, and then moves from the upper and lower directions to suck the bag mouth open. 4. Bag loading process: Bag loading is mainly accomplished by a manipulator, which mainly includes a bag taking mechanism, and the telescopic mechanism is a single-cylinder double-arm cylinder, a single-cylinder single-arm cylinder or a connecting rod mechanism. 5. Filling of materials: after the empty packaging bag is put into the discharge port, the automatic detection device will detect whether the packaging bag is in place, and after confirming that the packaging bag is completely in place, it will be fed. Digital control can realize automatic correction of material out-of-tolerance, automatic tracking of zero point, detection and suppression of overshoot, and alarm of over-and-under quantity. Weighing qualified materials and putting them into packaging bags can complete the filling of materials. 6. Transfer, folding and sealing of the packaging bag: the filled packaging bag moves forward through the conveyor, and the bag-finishing mechanism sorts out the mouth of the packaging bag, and then introduces it into the folding machine for folding and sealing, thus completing the full-automatic packaging of materials. 7. Packed bags are sorted by the stacker, such as bag inversion, bag introduction and transportation, bag posture adjustment, bag grouping, stacking and grouping, and lifting mechanism. Finally, the sorted bags are transported to the warehouse by forklift.

Technical parameters of automatic corn packaging machine SW-ABF-1200 1. Automatic packaging machine SW-ABF-1200 Packaging range: 20-50kg bagged products; 2. Packaging materials: paper bags, woven bags (coated) and double-layer composite bags; 3. Packaging speed: 800-1200 packs/hour (packaging speed varies according to materials) 4. Packaging accuracy: 0.2% 5. Packaging materials: different feeding methods can be selected according to different materials. It can package granular materials, powder materials, sheet materials or mixed materials. 6. Compressed air: 0.4 ~ 0.8 MPa, gas consumption 1.6 m3/min;; 7. Power supply: 6.2 kW AC 380 V 10% 50 Hz;



Maintenance instructions of SW-ABF-1200 automatic corn packaging machine 1. Check the parts regularly, once a month, to check whether the moving parts such as turbine, scroll bar, bolts and bearings on lubricating block rotate flexibly and wear out. If any defects are found, they should be repaired and replaced in time. 2. The working environment of the machine should be kept dry and clean, and it should be avoided in places where corrosive gases circulate. 3. after the machine is used or stopped, take out the rotary drum for cleaning and brushing the remaining powder in the bucket, and then install it properly to prepare for the next use. 4. If the machine is stopped for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with antirust oil and covered with cloth.