the following example is for you reference.
Main Advantages:
Technical details:
Fault phenomenon |
Reason |
Resolution method |
1. the motor can't start |
1. the fuse is blown
2. the control circuit is faulty |
1. Replace the fuse
2. Inspection control circuit |
2.the crusher is seriously vibrating |
1. Hammer wear is uneven
2. Symmetrical hammer weight deviation is large
3. Overload operation |
1. Adjust or replace
2. Balance matching
3. Reduce the amount of feed |
3.the crusher sounds abnormal |
1. Iron, stone into the crusher
2. the parts inside the machine are damaged or fall off |
1. Shutdown to do clear
2. Replace the damaged parts |
4.Finished product process |
1. the sieve is seriously worn
2. the sieve is not settled well |
1.Replace the sieve
2. Re-install |
5. Production Reduced |
1. Material moisture is too high
2. the hammer is worn out |
1. Drying materials
2. Turn the head or replace the hammer |
6. the suction nozzle can't suck feed. |
1. Suction point blocked
2. Fan blades are seriously worn
3. Poor exhaust
4. the voltage is too low |
1. Clear the blockage
2. Change the blade
3. Remove the dust bag
4. Identify the cause |
7. Crushing motor heating |
1. Feeding speed is too fast
2. High material humidity
3. Low voltage |
1. Adjust the feeding speed
2. Replacement of materials
3. Check the line |
8. the mixer can't pull |
1. Motor belt is loose
2. Motor reversal
3. Line faulty |
1. Tightening the belt
2. Adjust the thread head
3. Check the line |
Our Factory:
Certificates:
Our Service:
FAQ:
