(2) the motor is driven by two side gears, the motor power is 0.4 kw, the speed ratio of the reducer is 1:10. (the parameters are designed according to the actual tightening force.)(3)30 linear guide rail and lead screw are used to drive the rear position, parallel bars are used to lift, and the shaft is used to drive the lift motor. the power of the motor is 0.75 kw.
(4) water spray system in working trough, spray is controlled by solenoid valve, all nozzles are fan-shaped spray nozzles with adjustable angle, spray pipes and nozzles are made of UPVC material. (5) CH motor gear drive is used to rotate the plate roller, the motor power is 1.5 kw, the deceleration ratio is 1.5, and the rotating speed is driven by chain. (6) a sewage discharge hole is arranged at the bottom of the working groove, and a PVC pipe is adopted to enter the waste water pool. (7) a headbox is arranged at both ends of the machine body. the headbox is made of 2.0 mm, 304 stainless steel and is bent and fixed with the main frame. An electronic control box is arranged in the side door of the headbox at one end and is fixed with the headbox. (8) the side door of the equipment is fastened by buckle, which is convenient for disassembly. the plate thickness is 2.0 mm 304 stainless steel. (9) whole machine, frame paint: first sandblast, then spray anti-corrosion layer, then spray paint.