Product Introduction:
the time it takes for the sample to soften gradually until it is broken by water in the specified float meter from the time it is put into the water tank at a certain temperature, denoted by s.
the tests were carried out at specified temperatures according to the relevant codes. unless otherwise indicated, after distillation of liquid petroleum asphalt, the test temperature of residue is 50℃, and the test temperature of coal asphalt is 32℃ or 50℃.
this method is suitable for measuring the floating degree of slow setting liquid petroleum asphalt residue after distillation, coal asphalt and other materials.

Main technical parameters:
Power supply: AC 220V (-5% ~ +10%), 50Hz.
Water bath capacity: length 370 x width 300 x height 300(mm).
Applicable water quantity: 28L.
Heating device: electric heater, power 1300W.
Refrigerating device: new refrigerating compressor.
Temperature range: 5 ° C to 80 ° C
Temperature control accuracy: ±0.1℃.
Floating dish: wall thickness 1.4mm±0.1mm, mass 37.9g±0.2g.
Copper pipe: wall thickness 1.4mm±0.1mm, mass 9.8g±0.2g.
Ambient temperature: ≤30 ° C.
Relative humidity: 85% or less.
Power consumption: no more than 2000W.
Size: length 750 x width 540 x height 580(mm).
Net weight of instrument: 30kg

Asphalt float degree tester main technical characteristics
1, the instrument water bath using a new type of refrigeration compressor, high precision temperature controller, temperature control accuracy up to 0.1 ℃.
2, the instrument test with floating dish and copper pipe specifications, size, weight and so on are in line with the requirements of T 0631 standard.
3. the instrument can be used as a constant temperature water bath when the floating degree test of asphalt is not done.

Technical parameters:
Type SYD - 0631
Power supply: AC 220V (-5% ~ +10%), 50Hz
Water bath capacity: (370300300) mm (length width height);
Applicable water quantity: 28L;
Heating device: electric heater, power 1300W.
Refrigerating device: new refrigerating compressor;
Temperature control range: 5
Temperature control accuracy: ±0.1
Floating disc: wall thickness 1.4mm±0.1mm, mass 37.9g±0.2g;
Copper pipe: wall thickness 1.4mm±0.1mm, mass 9.8g±0.2g;
Ambient temperature: ≤30
Relative humidity: ≤85%;
Power consumption: no more than 2000W;
Size: (750540580) mm (length width height);
Net weight of instrument: 30kg

Instruments and Equipment:
Main engine: asphalt float tester
2 Float meter: floating dish tube copper
Glass tube thermometer (0~100℃, indexing 1℃)
4 glass tube thermometer (0~30℃, the degree is 0.5℃)
5 the glass cover
6 Three-core power cable
7 Fuse (15A)
Notes for asphalt flotation tester
1. Power cables are reliably grounded.
2. the power supply should be completely disconnected before opening the casing for maintenance.
3. Place in a ventilated, dry and pollution-free environment after use