Product Features:

• Test system resistance of single/dual wire wrist strap and footwear
• LCD/LED display and alarm
• Testing resistance displayed on LCD screen
• Testing range: 10K-100M
• the symbolization of wrist strap and footwear can Make operator easy to recognize the testing to beImplemented
• Dual footplate,can individually test two shoes Simultaneously
• Touch testing button could be used long time,no Worries on the testing button
• Installation could be wall mounted and fixed table Installation
• Switching signal can be workable to realize tripod turnstile and electromagnetic lock Linking under the situation of testing OK.
• Testing voltage is 28VDC,the maximum current is 0.0025mA,at the time of improving test Accuracy and guarantee operator's safety

Specifications:

Safety:

• Do not disassemble the product without permission
• Do not use in dangerous environment (such as flammable and explosive environment)
• Do not use in places with plenty of water or oil,high temperature and humidity

Industry Standard and System Certificate:

• Comply with ISO/CD8782-I Standard
• Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human body system resistance and footwear/human body resistance 
• Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system resistance
• Comply with the request of ANSI/ESD STM 9.1 on auditing test for footwear/human body system resistance
• Comply with the request of ANSI/ESD TR53 on periodic verification method for wristStrap/human body system resistance and footwear/human body system resistance
• Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist strap/human body system resistance and footwear/human body system resistance
• Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human body system resistance and footwear/human body system resistance

Function:
1.Meter Front Side
Meter include LCD display screen,wrist strap socket,touch test button and LED lights
A. LCD Display Screen: display the tested system 
Resistance value is ok or not
B. Wrist Strap Socket

• 1 single wrist strap socket,1 dual wire wrist strap socket
• Single wrist strap socket couldn't be used while dual wire wrist strap is working

C. Touch Test Button
Use fingers touch both contact chips,see Figure 2. Meter start to measure resistance,
Measure time will last 1-2 seconds,fingers can't leave contact chips until test finished

D. LED Light Indication

• According to tested system resistance value,different LED lights will flash and indicate different Status
• High Resistance: Yellow LED light
• Pass Resistance: Green LED light
• Low Resistance: Red LED light

E. LED Display Screen
2.DIP Switch
DIP switch can adjust different test range,see below detailed sheet:
Chart A. DIP switch test range adjust method
Chart B. DIP switch function adjust method


how to use:

• Wear wrist strap and shoes,connect wrist strap to cooresponding socket,stand up at the stainless steel testing plate
• Touch test button to start measuring,test will automatically stop if there is no result after 5 seconds,release and start test again.
• Test item and result can be both shown on the LCD screen and LED lights.If test fail,operator should do test again.while test pass,operator can go through under linking the tripod gate.
• Note:please press the test button gently,Do Not press hardly

Warranty
ESDMAN products have passed strict factory inspection. In case of failure, please contact our 
ESDMAN team and provide details of the failure
1.Warranty
12 months from the date when product arrived at the buyer's place
2.Repair Range
this product is inspected by ESDMAN QC. When it is in normal use within the warranty Period, if it is damaged or fails due to poor design and manufacturing, free maintenance can Be provided
3.the following details are not covered by warranty

• Test button,sockets and ground wires belong to the loss part and are not covered by warranty
• Damage, breakage or failure due to abnormal use
• Failure caused by modification or disassemble of maintenance not from ESDMAN
• Failure caused by fire, natural disaster, flood, earthquake and other natural irresistible factors
• Failure caused by abnormal voltage etc external factors

Package Include: