Chapter 1: Product introduction

Overview:

in order to cooperate with GB/T1345-2005 "Cement fineness test method - screening analysis method", the standard stipulates the implementation of cement fineness screening analysis test method of square hole 45um and 80um screen, reduce the influence of human factors in the test process, improve the test accuracy, Our factory and China Academy of Building Materials Science Cement and New materials research Institute jointly developed "FYS-150B environmental friendly cement fineness negative pressure sieve analysis instrument". the product is supervised and tested by the Institute of Cement and New Materials, China Academy of Building Materials Science. the product has the advantages of advanced structure, long service life, strong environmental protection performance, fast screening and analysis speed, high precision, good reproducibility, wide application, etc., and is in the international leading level. At present, it is the only special instrument that can meet the requirements of GB/T1345 "Cement fineness test Method" new standard sieve analysis method.

Criteria:

Low GB/T1345-2005

2 Purpose

TD502-2 environment-friendly negative pressure screen analyzer is widely used in cement fineness test and cement production control. Other industry powder fineness test can be used at the same time. The cement quality inspection station, cement factory, fly ash and other units are to use the instrument.

3 Technical Parameters

3.1 Screening analysis test fineness: 1mm-0.030mm

3.2 Screening analysis time: automatic

3.3 Control adjustable range: 120-180 seconds

3.4 Working negative pressure: 4000-6000Pa

3.5 Power supply voltage: 220V 50Hz

3.6 Feeding:10g-25g

3.7 Noise: < 75 dB

3.8 Weight: 25kg

3.9 Dimensions: 530350900mm

Description of Structure

TD502-2 environment-friendly negative pressure sieve analyzer is composed of two parts: sieve analyzer and industrial vacuum cleaner. the industrial vacuum cleaner is composed of a motor and a filter bag, a dust cleaning device, a vacuum pressure gauge to measure negative pressure, and a dust collecting cylinder to collect dust (Figure 1).

Environmental protection negative pressure sieve analyzer attached drawings:

1. Screen cover

2. Negative pressure screen

3. Negative pressure adjustment knob

4. Power switch

5. Time monitor

6. Negative pressure gauge

7. Dust collector

8. Hose

9. Dust collection container

10.TD502-2 environment-friendly negative pressure sieve analyzer

Chapter 2: Instructions for use

Principle of operation

TD502-2 environment-friendly negative pressure sieve analysis instrument uses air flow as the power medium of screening. When working, the whole system maintains negative pressure state. the final material to be tested in the screen screen is in a fluid state under the action of the air flow from the rotating jet nozzle, and moves with the air flow. the coarse particles larger than the size of the screen are left in the test screen, so as to achieve the purpose of screening. the screening system is combined with a small cyclone dust collection cylinder, which can collect fine particles through the screen from the air stream, the collection rate can reach more than 95%, thus reducing the number of dust cleaning vacuum cleaner.

2. Operation steps:

Put the test screen on the sieve base of the sieve analyzer to check the sealing performance; Then, the sample is weighed according to the required amount, poured into the test sieve, cover the sieve lid. Switch on the power supply (note: the power block must be grounded) according to the set screening time to turn on the switch, screening analyzer began to work; after automatic shutdown, the test screen in the screen residue weighing, screening test results can be obtained.

Screen analysis time setting: the set time of the machine is 120 seconds, 180 seconds, press the switch key. after setting the time, you can press the ON/off key for continuous sieve analysis.

Chapter three: Installation and maintenance knowledge

1. Equipment Installation:

1.1 the screen analyzer should be kept horizontally when working to avoid external vibration and impact.

1.2 the sole foot of the equipment should be smoothly padded.

1.3 the power supply of the device should be connected with a ground cable.

Maintenance knowledge

2.1 after each use, clean the shell in time. When cleaning the shell, use a soft cloth with soapy water to wipe it. Do not use gasoline or alcohol to wipe it.

2.2 after a period of use, if the rubber sealing ring is aging and damaged, it should be replaced in time, and the sealing degree must be covered thereafter.

2.3 after each use, the screen should be cleaned and the blocking phenomenon should be removed in time. the blocking phenomenon can be looked after by the screen in front of the sunshine light. the specific methods of screen cleaning and maintenance should be observed as follows:

2.3.1 after each use, the brush should be gently cleaned from the front and back of the screen to remove the ash in time, and the test screen should be stored in a dry container or plastic bag.

2.3.2 When the screen is blocked, the test screen can be reversed on the sieve analyzer, cover the screen cover for backsuction, empty screen for a period of time, and gently scrub with the sieve.

2.3.3 When the screen is blocked seriously, cleaning agent can be used to scrub.

2.4 If the filter bag of industrial vacuum cleaner is damaged, it should be replaced immediately to avoid dust entering the motor and damaging the vacuum cleaner.

2.5 Industrial vacuum cleaner in use, the air intake, exhaust outlet and other places can not be blocked, once blocked, dust reduction, motor overheating, easy to damage.

2.6 after long-term use, if the motor brush is worn and cannot be used, it should be replaced with a new brush of the same specification.

2.7 at the end of each test, the vibration device of the filter bag should be pulled to make the dust fall into the drawer.

Remarks:

When the number displayed on the negative pressure gauge is less than 4000Pa, clean the dust from the container. Generally, cleaning once every month (individual users can determine according to the number of use), open the dust cleaning door, gently beat the filter bag with a wooden rod, so that the dust falls from the filter bag, dump the dust, and finally close the dust cleaning door.

Chapter Three: after-sales guide

Chapter four: after-sales service description

Thank you for your trust in our company and welcome to buy our products! in order to make you better use of the product, we make the following maintenance service commitment to you through the warranty card attached to the product, and provide you with the maintenance service in strict accordance with the requirements of the service commitment.

1. Scope of application of after-sales service terms

1.1 these after-sales service terms are applicable to customers who purchase and use our products in mainland China. Direct customers who purchase and use our products in countries and regions outside mainland China, as well as in Hong Kong, Macao and Taiwan, if they do not purchase the products directly from our company, please contact and negotiate with our dealers for after-sales service matters.

1.2 If dealers or integrators purchase our products for sale in mainland China or countries and regions outside mainland China, as well as Hong Kong, Macao and Taiwan, the dealers or integrators shall be responsible for the relevant after-sales service and technical support. Our company will provide adequate training to dealers or integrators and provide appropriate technical support. so that dealers or integrators can give customers adequate after-sales service. during the warranty period, if our products have quality problems conforming to the warranty terms, our company is only responsible for returning to our company for repair or replacement. the distributor or integrator will be responsible for the transportation, storage and other related expenses incurred.