the shower room is divided into one-line, arc-shaped push-pull, diamond-shaped, square, and special ones are barrier-free folding and inward opening or one-line linkage, etc.
the first point is that when it comes to the shower room, glass is definitely the most important thing. You can choose tempered glass with a thickness of 6 mm or 8 mm. You don't need to pursue the thickness too much. Again, you must stick an explosion-proof film.
the second point, we must pay attention to the quality of other hardware, focusing on the smoothness and stability of the bearing. The pulley should be made of stainless steel, and the rubber strip should also be soft and transparent.
the third point is that it is recommended that the water retaining strips of the shower room should be pre-buried, which is more durable and can avoid the problem of mildew and even water leakage caused by the glued water retaining strips installed after the installation. however, when pre-buying, the gap between the ground and the stone-based water retaining strip must be compacted to prevent water from infiltrating the sand-ash layer, causing the wall to return to moisture and alkali.
the fourth point, glue, use mildew-proof glass glue or MS glue between the frame and the wall.