Zhejiang Huajian Inspection third party inspection service -------garment shipment inspection

 

Garment outgoing inspection items

I. Appearance inspection

1, thick and fine yarn, color difference, stain, yarn running, damage, snake child, dark horizontal, hair, feel;

2, collar collar clamp ring to flat, round.

Two, cloth quality inspection

Shrinkage, color difference, flat machine collar, ribbed pull frame color degree and texture.

Three: dimensional inspection

Strictly follow the size chart.

Four: symmetry test

Unlined upper garment:

1. the size of collar tip and whether the collar bone is relative;

2, the width of two shoulders and two clip rings;

3, two sleeve length, cuff width;

4, the length of both sides, the length of the foot fork.

Pants:

1, pant leg length, width, pant leg width;

2. the height of the left and right bag, the size of the bag mouth, and the length of the left and right sides of the back bag.

5. Inspection of workmanship

Unlined upper garment:

1, all parts of the line is straight, neat and firm, suitable tightness, no floating line, broken line, jumper phenomenon, barge line should not be too much and can not appear in the conspicuous position, needle distance should not be too thin or too dense;

2. the collar and clip gesture should be even to avoid excessive collar socket and clip ring capacity;

3. Common lapel defects: the collar tube is crooked, the bottom tube is exposed, the collar edge goes yarn, the tube surface is not flat, the collar nozzle is high and low, the collar tip size;

4. Common defects of round collar: the collar is crooked, the collar is wavy, and the collar bone is exposed;

5, clamp top to straight Angle;

6, bag mouth should be straight, bag mouth stop to cut;

7, a full house should be sheared if the stop is redundant;

8, shirt foot on both sides of the horn, the side of the fork can not be high and low foot;

9. Draw a full house and draw a full house. Draw a full house and draw a full house.

10, Hasau line can not be too much barge, pay attention to the thread cut;

11. the bottom line should be tightened properly, and all bone positions should not be wrinkled (especially the collar ring, clip ring and foot circumference);

12, the button door positioning is accurate, the cutting is clean wireless hair, the button door line is smooth without loose mouth, the button line can not be too loose or too long.

Pants:

1. Pay attention to the workmanship of the back bag, and the mouth of the bag should be straight;

2. the full house line should be parallel, not bent or uneven in width;

3. the thickness, length and position of the date should meet the requirements.

Six, ironing inspection

1, parts of the ironing flat clothes, no hot yellow, aurora, water stains, dirt, etc.;

2, the thread should be thoroughly cut.

Vii. Material inspection

1. the position of the shipping mark and the sewing effect, whether the listing is correct, whether there is any omission, and the texture of the plastic bag;

2, cotton rope color, root thickness and tightness, falling effect;

3, all in accordance with the material sheet instructions.

Viii. Package inspection

Fold straight plain clothes, in strict accordance with the packing instructions.