Safety:

• Do not disassemble the product without permission.
• Do not use in dangerous environment (such as flammable and explosive)
• Do not use in place with plenty of oil or water, high temperature and humidity.

Industry Standard and System Certificate:

• Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human body system resistance 
• Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system resistance
• Comply with the request of ANSI/ESD TR53 on periodic verification method for wrist strap/human body resistance
• Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist strap/human body resistance 
• Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human body resistance 

Feature:

• Real time monitor dual wire wrist strap system resistance.
• Monitor is ready to test when plug in power adapter, connect wrist strap and grounding normal.
• without connect wrist strap, infrared will detect operator or object when connect sensor externally, corresponding red LED light will flash and monitor will alarm. Wrist strap will be normal while connect wrist strap and monitor green LED is on. (It is a optional function)
• Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally.
• Monitor will not alarm while pull out wrist strap.
• Monitor will alarm when wrist strap is in open circuit or poor contact.
• Monitor two dual wire wrist straps, two table mats and two metal groundings.
• Independent junction box is convenient for installation and operation.
• When wrist strap test exceed upper limit or lower limit, different red LED light flash and comes together with audible alarm.
• When ESD table mat test fail, red LED flash and comes together with audible alarm.
• Beautiful appearance, strong anti-interference ability.

Specification:

Test Range Setting Via DIP Switch:
Installation:

• Open the package box and find out the screws to install monitor at any convenient place of the Workbench. 
• Connect monitor yellow/green grounding cord into factory grounding. 
• Insert power adapter into monitor and connect it into ground socket, all LED light turn to red and comes with audible alarm. the grounding of power socket is an important part of the System and should be connected to ESD grounding point.
• Insert table mat cord into monitor and then connect it to workbench, corresponding green LED Is on.
• Plug wrist strap junction box by matched network cables and connect them with monitor.
• Connect operator's dual wire wrist strap into wrist strap socket, corresponding green LED will be on while connect well wrist strap. If red LED is on, please check if wrist strap has good contact with monitor. 
• Monitor is ready to use after testing 2 workstations.

Warranty:
ESDMAN product have passed strict factory inspection. In case of failure, please contact our ESDMAN team and provides details of the failure.
Warranty

• 12 months from the date when products arrived at the buyer's place.

Coverage

• this product is inspected by ESDMAN QC, when it is in normal use within the warranty period, if it is damaged or fails due to poor design and manufacturing, free maintenance could be provided.

Out of coverage

• Ground wires, network cable and connector belong to the loss part and are not covered by warranty.
• Damage, breakage or failure due to abnormal use.
• Failure caused by modification or disassemble of maintenance not from ESDMAN
• Failure caused by fire, natural disaster, flood, earthquake and other natural irresistible factors.
• Failure caused by abnormal voltage etc external factors.

Package Include:
Part Included List