NYDE Tuning Fork Resonance Density Meter 4~20Ma Or RS485 Modbus RTU 24VDC

NYDE Tuning Fork Resonance Density Meter

 

the NYDE plug-in density meter adopts plug-in installation and is widely used in pipelines. the density of medium in open tanks and closed tanks is directly determined by the vibration frequency received by the tuning fork of the sensor inserted into the medium. the built-in temperature sensor of the sensor provides temperature compensation for it.

Scope of application: the plug-in density meter can perform density detection online in real time. It can be used for process control of products with density as the basic parameter or quality control with solid percentage or concentration percentage as a reference. Typical industries include petrochemical industry, wine industry, food industry, pharmaceutical industry and mineral processing (such as clay, carbonate, silicate, etc.), which are specifically used in the interface detection and mixing of multi-product pipelines in the above industries the density detection, the end-point monitoring of the reactor, and the interface detection of the separator.

 

NYDE Tuning Fork Resonance Density Meter Technical Parameters

 

Measuring range	0 2.5 g /cc (0 2500 kg/m3),0~100.0%
Calibration range	0 2.5 g /cc (0 2500 kg/m3),0~100.0%
Measurement accuracy	± 0.002 g /cc (± 2 kg/m3),±0.5%
Repeatability	± 0.001 g /cc (± 0.2 kg/m3) ±0.1%
Medium temperature range	-50℃~+150℃
Working pressure	4mpa
Fluid viscosity range	0600 cP
Temperature Coefficient	0.1 kg/m3/℃(±0.5%) after correction
Stress effect	Negligible
Built-in temperature sensor	Digital sensor
Wetted material	316L,2205 Stainless steel,HAC,Titanium alloy
Fork body coating	Standard PTFE or PFA
Power supply	24VDC,≥50 mA
Analog signal output	4-20 mA,0-1000Hz,RS485 Modbus RTU
Output accuracy (20℃)	±0.1% of reading or ± 0.05% FS
Output repeatability (-40~+85℃)	± 0.05% FS
Process connection	DIN 50 PN16 DIN 50 PN40
	IDF and RJT sanitary
Protection level	IP67
Shell	Aluminum alloy